ROBOTIME Gingerbread House DIY Miniature Kit

1. ആമുഖം

This instruction manual provides comprehensive guidance for assembling your ROBOTIME Gingerbread House DIY Miniature Kit, model RBT-DG176. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This kit is designed for individuals aged 14 and up.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: This kit contains small parts which may pose a choking hazard. Keep out of reach of children under 3 years of age. Adult supervision is recommended for builders under 14 years old. Exercise caution when handling sharp tools or small components. Do not ingest any parts of the kit.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all components listed below are present in your kit. If any parts are missing, please contact customer support.

ചിത്രം 3.1: കിറ്റ് ഘടകങ്ങൾ കഴിഞ്ഞുview

• Pre-cut wooden sheets (approximately 250 pieces)
• Paper cutouts and stickers
• Small plastic accessories (e.g., candy jars, miniature figures)
• LED light components and battery box (batteries not included)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ
• Tweezers (may be included for small parts)

കുറിപ്പ്: You will need to provide 2 AAA batteries for the LED lights and a suitable adhesive (e.g., craft glue) for optimal assembly, as the included adhesive strips may not be sufficient for all parts.

4. അസംബ്ലി നിർദ്ദേശങ്ങൾ

The assembly process typically takes approximately 6 hours. Follow the detailed diagrams in the included instruction booklet for step-by-step guidance. The kit utilizes a slot-in design for many components.

4.1 തയ്യാറാക്കൽ

1. Unpack all components and organize them by type or number as indicated in the manual.
2. വൃത്തിയുള്ളതും നല്ല വെളിച്ചമുള്ളതുമായ ഒരു ജോലിസ്ഥലം ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
3. Gather necessary tools: craft glue, precision tweezers (if not included), and 2 AAA batteries.

4.2 പൊതുസമ്മേളന ഘട്ടങ്ങൾ

1. Carefully detach wooden pieces from their sheets. Use a craft knife if necessary to ensure clean breaks, but avoid forcing pieces.
2. Identify each piece using the numbering system in the instruction booklet.
3. Follow the diagrams to connect pieces using the slot-in mechanism. Apply a small amount of glue to joints for added stability, especially for structural elements.
4. Attach paper cutouts and stickers as indicated. Ensure proper alignment before pressing firmly.
5. Assemble miniature furniture and decorative elements according to their specific diagrams.

Figure 4.1: Assembly in Progress

4.3 Key Features Assembly

• Red Arch Door: Assemble the red door frame and door panel, ensuring the door can open and close smoothly.
• Dessert Display Cabinet: Construct the multi-tiered display cabinet and arrange the miniature dessert pieces.
• സ്റ്റോറേജ് കാബിനറ്റ്: Assemble the small storage cabinet, often located inside the house, and place any miniature jars or items.
• Snowflake Window: Carefully attach the window frame and any transparent or snowflake-patterned inserts.

Figure 4.2: Detailed Product Features

5. Operating LED Lights

The kit includes LED lights to illuminate your miniature gingerbread house. Follow these steps to install and operate them:

1. Locate the LED light string and the battery box.
2. ബാറ്ററി ബോക്സിൽ 2 AAA ബാറ്ററികൾ തിരുകുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക.
3. Route the LED light string through the designated channels or openings in the house structure as shown in the manual. Secure the lights with small adhesive dots or tape if necessary.
4. Position the battery box in its designated location, typically at the base or rear of the model. Ensure it is accessible for switching the lights on/off.
5. Flip the switch on the battery box to turn the LED lights on or off.

6. പരിപാലനം

• Keep the assembled model in a dry environment, away from direct sunlight and excessive humidity, to prevent warping or damage to the wooden and paper components.
• To clean, gently dust with a soft, dry brush or cloth. Avoid using liquid cleaners.
• If the LED lights dim, replace the AAA batteries.
• Handle the finished model with care, especially delicate parts.

7. പ്രശ്‌നപരിഹാരം

• വിട്ടുപോയ ഭാഗങ്ങൾ: If you discover missing components, please refer to the contact information in the Support section to request replacements.
• യോജിക്കാത്ത കഷണങ്ങൾ: Ensure you are using the correct pieces for each step. Do not force pieces together; gently sand edges if necessary for a snug fit.
• LED വിളക്കുകൾ പ്രവർത്തിക്കുന്നില്ല: Check that batteries are inserted correctly with the right polarity. Ensure the battery box switch is in the 'on' position. Verify that the light string connections are secure.
• Adhesive Issues: For parts requiring stronger adhesion, use a high-quality craft glue in addition to or instead of the provided adhesive strips.
• നിർദ്ദേശങ്ങൾ വ്യക്തമല്ല: Refer to the detailed diagrams in the manual. If still unclear, contact customer support for assistance.

8 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 8.1: ഉൽപ്പന്ന അളവുകൾ

9. പിന്തുണ

For any questions regarding assembly, missing parts, or general inquiries, please contact ROBOTIME customer service. Our team is available to assist you.

• ഓൺലൈൻ ഉപഭോക്തൃ സേവനം: Available 24 hours. Refer to the product packaging or official ROBOTIME webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.