Roborock F25 Ultra Steam Wet Dry Vacuum Cleaner Instruction Manual

ആമുഖം

The Roborock F25 Ultra is a versatile wet and dry vacuum cleaner designed for comprehensive floor cleaning. It integrates advanced steam and hot water cleaning technologies with powerful suction and intelligent features to provide an efficient cleaning experience. This manual provides essential information for the proper setup, operation, and maintenance of your device.

Figure 1: Roborock F25 Ultra Steam Wet Dry Vacuum Cleaner

ബോക്സിൽ എന്താണുള്ളത്

സജ്ജീകരണം ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം അൺപാക്ക് ചെയ്ത് എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

• Vacuum Cleaner Main Unit
• ചാർജിംഗ് ഡോക്ക്
• പവർ കോർഡ്
• Roller Brush (pre-installed)
• അധിക റോളർ ബ്രഷ്
• Extra Washable Filter
• മെയിൻ്റനൻസ് ബ്രഷ്
• Floor Cleaning Solution (Detergent)
• ഉപയോക്തൃ മാനുവൽ

Figure 2: Included components of the Roborock F25 Ultra.

സജ്ജമാക്കുക

1. ഹാൻഡിൽ ഇൻസ്റ്റലേഷൻ

Align the handle with the top opening of the main unit. Push down firmly until you hear a click, indicating it is securely in place. Ensure the electrical connection is properly seated.

2. Charging Dock Placement and Power Connection

Place the charging dock on a flat, stable surface near a power outlet. Connect the power cord to the charging dock and plug it into a 120V, 60Hz outlet. The dock will dry and charge the vacuum cleaner.

3. പ്രാരംഭ ചാർജിംഗ്

Place the vacuum cleaner onto the charging dock. Ensure the charging contacts align. Allow the device to fully charge before its first use. The display on the handle will indicate the battery level.

4. Filling the Clean Water Tank and Detergent Dispenser

Press the release button to detach the clean water tank from the main unit. Open the cap and fill the tank with tap water. Locate the auto detergent dispenser compartment on the clean water tank. Pour the provided Roborock floor cleaning solution into this compartment. The device will automatically mix and dispense the detergent as needed.

5. Installing the Roller Brush

If not already installed, align the roller brush with the drive mechanism at the bottom of the main unit. Gently push and rotate until it clicks into place. Ensure the brush cover is securely closed.

Video 1: Preparing Roborock F25 Ultra for Use. This video demonstrates the initial setup steps including handle installation, charging dock connection, and tank filling.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ, മോഡ് തിരഞ്ഞെടുക്കൽ

Tilt the vacuum cleaner back to disengage the parking lock. Press the Power button on the handle to turn on the device. Use the Mode button to cycle through the available cleaning modes: Steam Mode, Hot Water Mode, Sponge Mode (suction only), and Auto Mode. The display on the handle will show the current mode and battery level.

2. ക്ലീനിംഗ് മോഡുകൾ

• സ്റ്റീം മോഡ്: Delivers 356°F steam to lift dried messes and stubborn stains. Ideal for deep cleaning.
• ചൂടുവെള്ള മോഡ്: Uses 187°F hot water to break down grease and sticky spills. Effective for kitchen and dining areas.
• Sponge Mode: Provides powerful suction for dry debris and light wet messes without heat.
• യാന്ത്രിക മോഡ്: The AI-enhanced DirTect Smart Sensor monitors dirt levels in real-time and automatically adjusts cleaning intensity (suction, water, and heat) for optimal results.

Figure 3: Key cleaning technologies and features of the Roborock F25 Ultra.

3. Blue Light Illumination

The integrated blue light illuminates dust, crumbs, and fine particles on dark or hard-to-see surfaces, ensuring thorough cleaning.

Figure 4: Blue Light Illumination for enhanced debris detection.

4. 180° Lay-Flat Design & APP Remote Control

The 180° lay-flat design allows the vacuum cleaner to glide effortlessly under low furniture like beds, sofas, and cabinets. For precise control in hard-to-reach spaces, the device can be steered via a dedicated mobile application.

Figure 5: 180° Lay-Flat Design and App Remote Control for cleaning under furniture.

5. AI-Enhanced Wheels

The AI-enhanced SlideTech 2.0 features dual brushless motors controlling each wheel, providing ultra-smooth maneuverability and responsive turns. This reduces effort during cleaning.

മെയിൻ്റനൻസ്

1. Self-Cleaning & Self-Drying System

After each use, place the vacuum cleaner on the charging dock. Press the Self-Clean button on the handle. The device will automatically clean the rollers with 356°F steam and 194°F high-temperature water, removing stuck-on messes. Following the self-cleaning, 203°F hot-air drying will activate to keep internal parts dry and ready for the next use. This system eliminates the need for manual scrubbing of the rollers.

Figure 6: Automated Self-Cleaning and Self-Drying process.

2. വൃത്തികെട്ട വാട്ടർ ടാങ്ക് കാലിയാക്കലും വൃത്തിയാക്കലും

Regularly empty the dirty water tank after each cleaning session. Press the release button to detach the dirty water tank. Open the tank and dispose of the collected dirty water and debris. Rinse the tank thoroughly with clean water. The multi-stage separation system helps to separate solid waste from wastewater, making disposal easier.

3. ഫിൽട്ടർ മെയിൻ്റനൻസ്

Remove the filter from the dirty water tank. Rinse it under running water to remove any trapped debris. Allow the filter to air dry completely for at least 24 hours before reinstalling. Do not reinstall a wet filter. An extra filter is provided for convenience, allowing you to use the device while one filter is drying.

4. Roller Brush Maintenance

While the self-cleaning system handles most of the roller maintenance, it is recommended to periodically inspect the roller brush for any tangled hair or debris that might not have been removed. The Anti-Tangle Design with JawScrapers helps prevent hair wrap, but manual removal may occasionally be necessary. The roller brush can be easily removed for deeper cleaning if required.

Video 7: Routine Maintenance of Roborock F25 Ultra. This video provides detailed steps for cleaning the dirty water tank, filter, and roller brush.

സ്പെസിഫിക്കേഷനുകൾ

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Roborock F25 Ultra, consider the following common troubleshooting steps:

• ശക്തിയില്ല: Ensure the device is properly seated on the charging dock and the power cord is securely plugged into a working outlet. Check the battery level on the display.
• Poor Suction/Cleaning: Verify that the clean water tank is filled and the dirty water tank is not full. Check if the roller brush is free of tangles and debris. Ensure the filter is clean and dry.
• No Steam/Hot Water: Confirm the device is in Steam Mode or Hot Water Mode and has sufficient water in the clean tank. Allow adequate time for the device to heat up (indicated on the display).
• അസാധാരണമായ ശബ്ദങ്ങൾ: Check the roller brush and dirty water tank for any obstructions or foreign objects.
• ആപ്പ് കണക്റ്റിവിറ്റി പ്രശ്നങ്ങൾ: Ensure your device is within Wi-Fi range and the app is updated to the latest version. Refer to the app's instructions for pairing.

For more detailed troubleshooting, please refer to the full user manual or contact Roborock customer support.

വാറൻ്റിയും പിന്തുണയും

The Roborock F25 Ultra comes with a standard manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official Roborock website. For technical support, spare parts, or service inquiries, please contact Roborock customer service through their official channels.