ANYCUBIC Photon Mono M7 PRO and Purifier 2.0 User Manual

1. ആമുഖം

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your ANYCUBIC Photon Mono M7 PRO resin 3D printer and the accompanying Purifier 2.0. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2 സുരക്ഷാ വിവരങ്ങൾ

Resin 3D printing involves materials and processes that require careful handling. Always adhere to the following safety guidelines:

• Wear appropriate personal protective equipment (PPE), including gloves and safety glasses, when handling resin.
• Operate the printer in a well-ventilated area. The Purifier 2.0 assists with ventilation, but additional airflow is recommended.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place.
• Avoid skin contact with uncured resin. In case of contact, wash thoroughly with soap and water.
• Do not dispose of liquid resin down drains. Cure residual resin under UV light before disposing of it as solid waste.
• പ്രിന്ററും റെസിനും കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• പവർ സപ്ലൈ ശരിയായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്നും ഗ്രൗണ്ട് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• ANYCUBIC Photon Mono M7 PRO 3D Printer
• ANYCUBIC Purifier 2.0
• പവർ അഡാപ്റ്ററും കേബിളും
• റെസിൻ വാറ്റ്
• പ്ലേറ്റ് നിർമ്മിക്കുക
• USB ഡ്രൈവ്
• Tool Kit (e.g., scraper, Allen wrenches)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image: The ANYCUBIC Photon Mono M7 PRO 3D printer shown alongside the Purifier 2.0 ventilation unit.

4. സജ്ജീകരണം

4.1 അൺപാക്കിംഗും പ്ലേസ്മെന്റും

1. പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
2. Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight.
3. Remove any protective films or packaging materials from the printer.

4.2 Purifier 2.0 Connection

The Purifier 2.0 is designed to reduce odors and VOCs during printing. Connect it as follows:

1. Identify the ventilation port on your Photon Mono M7 PRO.
2. Connect the Purifier 2.0's flexible hose to the printer's ventilation port.
3. Extend the exhaust hose from the Purifier 2.0 to an external environment, such as a window, to vent gases effectively.

Image: The ANYCUBIC Purifier 2.0 unit, showing its main body and attached flexible hoses for ventilation.

Image: The ANYCUBIC Photon Mono M7 PRO printer with the Purifier 2.0 connected and its exhaust hose directed out of a window, illustrating proper ventilation setup.

Image: A diagram illustrating the compatibility and installation methods of the Purifier 2.0 with different ANYCUBIC printer series, including direct connection for M7 series and adapter requirements for others.

4.3 Initial Power-On and Leveling

1. പവർ അഡാപ്റ്റർ പ്രിന്ററുമായി ബന്ധിപ്പിച്ച് ഒരു പവർ ഔട്ട്ലെറ്റിൽ പ്ലഗ് ചെയ്യുക.
2. പവർ സ്വിച്ച് ഉപയോഗിച്ച് പ്രിന്റർ ഓണാക്കുക.
3. Follow the on-screen instructions for initial setup, including build plate leveling. Refer to the quick start guide for detailed leveling procedures.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Preparing Your Model for Printing

1. Install a compatible slicing software (e.g., Anycubic Photon Workshop) on your computer.
2. Import your 3D model (STL, OBJ format) into the slicing software.
3. Adjust print settings such as layer height, exposure time, and support structures. The Photon Mono M7 PRO supports high-speed printing up to 170mm/h with high-speed resin and 130mm/h with standard resin.
4. Slice the model and save the generated file ഒരു USB ഡ്രൈവിലേക്ക്.

Image: A visual comparison demonstrating the ANYCUBIC Photon Mono M7 PRO's printing speed of up to 170mm/h, significantly faster than other printers shown at 150mm/h.

5.2 ഒരു പ്രിന്റ് ആരംഭിക്കുന്നു

1. Ensure the resin vat is clean and securely installed.
2. Pour resin into the vat, ensuring it is below the maximum fill line.
3. Insert the USB drive with your sliced model into the printer's USB port.
4. On the printer's touchscreen, select your model file and initiate the print.
5. The Purifier 2.0 will activate automatically or can be manually started to manage fumes.

5.3 വിപുലമായ സവിശേഷതകൾ

• 14K High-Precision LCD: The 14K monochrome LCD screen (13312*5120 resolution, 16.8 × 24.8 µm XY resolution) allows for printing intricate details, including holes as small as 0.3 mm in diameter.
• COB LighTurbo 3.0: This advanced light source system, combined with Fresnel lenses and front-facing reflectors, achieves a light angle within 3° and light uniformity exceeding 90%. It includes a light-off compensation algorithm to enhance printing success rates.
• Circulation Heating: The printer features a circulation heating system designed to maintain an optimal printing temperature, which is crucial for consistent resin performance and print quality.

Image: A side-by-side comparison of a highly detailed 3D print achieved with the M7 Pro LightTurbo 3.0 Light Source versus a print with general precision from another COB light source, highlighting the superior resolution.

Image: A table comparing key specifications of the Photon Mono M7 Pro (LightTurbo 3.0, 0.15mm minimum forming diameter, ≤3° minimum precision light angle, ≥90% light uniformity, Dynamic Light-off Compensation) against other printers.

Image: A diagram illustrating the internal circulation heating system of the Anycubic Photon Mono M7 Pro, designed to maintain optimal printing temperature, contrasted with a standard resin printer without this feature.

6. പരിപാലനം

6.1 പ്രിന്റർ വൃത്തിയാക്കുന്നു

• After each print, carefully remove the build plate and clean off any residual resin.
• Use isopropyl alcohol (IPA) and a soft cloth to clean the build plate and printer surfaces.
• Inspect the FEP film in the resin vat for damage or cured resin particles. Replace the FEP film if necessary.
• Never use sharp objects to scrape the FEP film or LCD screen.

6.2 Resin Handling and Storage

• Filter unused resin from the vat back into its original bottle using a mesh filter.
• Store resin bottles in a cool, dark, and dry place, away from direct sunlight.
• Ensure resin bottles are tightly sealed to prevent contamination and premature curing.

6.3 Purifier 2.0 Maintenance

• Regularly check the filter in the Purifier 2.0 and replace it as recommended by the manufacturer to maintain optimal performance.
• Keep the hoses clear of obstructions.

7. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന സാധാരണ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു. കൂടുതൽ സങ്കീർണ്ണമായ പ്രശ്നങ്ങൾക്ക്, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

7.1 Print Failures

• Model not sticking to build plate: Re-level the build plate, increase bottom exposure time, or ensure the room temperature is adequate.
• Partial prints or layers missing: Check for insufficient supports, incorrect exposure settings, or resin contamination.
• Deformed prints: Verify print orientation, support placement, and ensure the FEP film is not damaged.

7.2 പ്രിന്റർ പ്രതികരിക്കുന്നില്ല

• Ensure the power cable is securely connected and the power switch is on.
• പ്രിന്റർ പുനരാരംഭിക്കുക.
• Check the USB drive for corruption or incompatible file ഫോർമാറ്റുകൾ.

7.3 Purifier Not Working

• Verify the power connection to the Purifier 2.0.
• Check if the filter is clogged and needs replacement.
• Ensure hoses are not kinked or blocked.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

ANYCUBIC products come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ANYCUBIC website. For technical support, troubleshooting assistance, or spare parts, please contact ANYCUBIC customer service through their official channels.