റാണെയ്ൻ RH8K-LPG

Ranein GEN II Propane Gas Tankless Water Heater

Model: RH8K-LPG (3.6 GPM, 80,000 BTU, Indoor Propane)

1. ആമുഖം

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Ranein GEN II Propane Gas Tankless Water Heater, Model RH8K-LPG. This indoor unit is designed to provide on-demand hot water with a maximum flow rate of 3.6 Gallons Per Minute (GPM) and an 80,000 BTU heating capacity.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

  • തുടർച്ചയായ ചൂടുവെള്ളം: Delivers up to 3.6 GPM, suitable for 2-3 simultaneous hot water outlets (e.g., shower, kitchen sink, bar).
  • സ്ഥിരമായ താപനില നിയന്ത്രണം: Advanced technology ensures consistent water temperature without sudden fluctuations.
  • ഊർജ്ജ കാര്യക്ഷമത: Heats water only when needed, reducing standby energy waste compared to traditional tank heaters.
  • കോംപാക്റ്റ് ഡിസൈൻ: Wall-mounted unit saves valuable floor space, ideal for smaller homes or renovations.
  • പ്രീസെറ്റ് മോഡുകൾ: Features four specialized one-click modes for specific needs: Dish (100°F), Fruit (95°F), Infant (104°F), and Elderly (107°F).
  • Included Vent Pipe: Comes with an exhaust pipe, eliminating the need for a separate purchase.
  • നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Utilizes an oxygen-free copper tank for reduced heat loss and enhanced energy efficiency.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: അനുചിതമായ ഇൻസ്റ്റാളേഷൻ, ക്രമീകരണം, മാറ്റം, സേവനം, അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണികൾ എന്നിവ വസ്തുവകകൾക്ക് കേടുപാടുകൾക്കോ ​​പരിക്കുകൾക്കോ ​​മരണത്തിനോ കാരണമാകും. ഈ ഉപകരണം ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനോ അല്ലെങ്കിൽ സർവീസ് ചെയ്യുന്നതിനോ മുമ്പ് ഇൻസ്റ്റാളേഷൻ, ഓപ്പറേറ്റിംഗ്, മെയിന്റനൻസ് നിർദ്ദേശങ്ങൾ നന്നായി വായിക്കുക.

പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: This appliance MUST be installed by licensed professionals in accordance with all local building and plumbing codes. Installation is NOT recommended for areas above 2,000 feet elevation.

സുരക്ഷാ സവിശേഷതകൾ: The Ranein GEN II water heater incorporates an 8-layer all-around protection system for user safety, including:

  • Flame Out Protection
  • അമിത ചൂടാക്കൽ സംരക്ഷണം
  • Dry Burning Protection
  • ഓവർ ടെമ്പറേച്ചർ പ്രൊട്ടക്ഷൻ
  • കാലഹരണപ്പെടൽ പരിരക്ഷണം
  • Pipe Blockage Protection
  • High Temperature Lock Protection
  • Excessive Air Pressure Protection

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

  • Ranein Tankless Water Heater (Model RH8K-LPG) x1
  • Vent Pipe x1
  • അസംബ്ലി കിറ്റ് x1
  • ഉപയോക്തൃ മാനുവൽ x1

4 സ്പെസിഫിക്കേഷനുകൾ

Ranein Tankless Water Heater with dimensions and specifications

Image: Ranein Tankless Water Heater with key specifications and dimensions.

സ്പെസിഫിക്കേഷൻമൂല്യം
ബ്രാൻഡ്റാനൈൻ
മോഡൽ നമ്പർആർഎച്ച്8കെ-എൽപിജി
ഉൽപ്പന്ന അളവുകൾ19.08"ആംശം x 7.66"ആംശം
പ്രത്യേക ഫീച്ചർLED ഡിസ്പ്ലേ
നിറംചാരനിറം
വാല്യംtage120 വോൾട്ട് (എസി)
പരമാവധി താപനില104 Degrees Fahrenheit (Preset Infant Mode)
ശൈലിപ്രൊപ്പെയ്ൻ
മൗണ്ടിംഗ് തരംമതിൽ
ഇനത്തിൻ്റെ ഭാരം23.1 പൗണ്ട്
ഫ്ലോ റേറ്റ്Max 3.6 GPM
BTU റേറ്റിംഗ്80,000 ബി.ടി.യു
Gas Water Heater Selection Guide showing GPM and BTU options

Image: Gas Water Heater Selection Guide, illustrating different GPM and BTU options for various outlet points. The 3.6 GPM, 80,000 BTU model is highlighted for 2-3 outlet points.

5. ഇൻസ്റ്റലേഷൻ

Installation of the Ranein tankless water heater requires adherence to all local building, plumbing, and gas codes. It is mandatory that installation be performed by a licensed professional.

പൊതു ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ:

  1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കൽ: Choose an indoor location that is protected from freezing temperatures and has adequate ventilation. Ensure the location allows for proper venting of exhaust gases.
  2. മൗണ്ടിംഗ്: Use the provided template to mark and drill mounting holes. Securely mount the water heater to a sturdy wall surface.
  3. വെൻ്റ് പൈപ്പ് കണക്ഷൻ: Connect the included vent pipe to the top exhaust port of the unit. Ensure all connections are sealed properly to prevent gas leaks.
  4. ജല കണക്ഷനുകൾ: Connect the cold water inlet (blue) and hot water outlet (red) to your home's plumbing system using standard 1/2" NPT fittings.
  5. ഗ്യാസ് കണക്ഷൻ: Connect the propane gas supply to the gas inlet (yellow) using appropriate gas lines and fittings. Ensure all gas connections are leak-tested.
  6. ഇലക്ട്രിക്കൽ കണക്ഷൻ: Plug the unit into a standard 120V AC electrical outlet. No special wiring is typically required.
  7. സിസ്റ്റം ഫ്ലഷ്: Before initial use, flush the system to remove any debris.

വീഡിയോ: ഒരു ഓവർview of the Ranein Gas Tankless Water Heater (80,000 BTU) highlighting its features and ease of installation. This video demonstrates the product's design and basic setup components.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Ranein tankless water heater features an intuitive LED display and touch control panel for easy operation.

Close-up of the Ranein Tankless Water Heater LED display and touch control panel

ചിത്രം: ക്ലോസ്-അപ്പ് view of the LED display and touch control panel, showing temperature settings and mode icons.

അടിസ്ഥാന പ്രവർത്തനം:

  1. പവർ ഓൺ/ഓഫ്: Press the power button on the LED display to turn the unit on or off.
  2. താപനില ക്രമീകരണം: Use the up and down arrows on the control panel to set your desired water temperature. The LED display will show the current temperature setting.
  3. ജലപ്രവാഹം: The unit will automatically activate and begin heating water when a hot water tap is opened.

സ്മാർട്ട് മോഡുകൾ:

Utilize the one-click specialized modes for optimized temperature settings:

Smart Mode settings for Ranein Tankless Water Heater: Dish, Fruit, Infant, Elderly

Image: Visual representation of the four Smart Modes: Dish (100°F), Fruit (95°F), Infant (104°F), and Elderly (107°F).

  • Dish Mode (100°F): Ideal for washing dishes.
  • Fruit Mode (95°F): Suitable for washing fruits and vegetables.
  • Infant Mode (104°F): Provides a safe and comfortable temperature for infant bathing.
  • Elderly Mode (107°F): Offers a warm and gentle temperature for elderly users.

7. പരിപാലനം

Regular maintenance ensures the longevity and efficient performance of your tankless water heater.

  • Annual Flushing: It is recommended to flush the water heater annually to remove mineral buildup. This helps maintain efficiency and prevent damage. Consider installing maintenance valves to simplify this process.
  • ഫിൽട്ടർ വൃത്തിയാക്കൽ: Periodically check and clean the inlet water filter to ensure optimal water flow.
  • Vent Pipe Inspection: Regularly inspect the vent pipe for any obstructions or damage.
  • ബാഹ്യ ശുചീകരണം: ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് യൂണിറ്റിൻ്റെ പുറംഭാഗം വൃത്തിയാക്കുകamp തുണി. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഉപയോഗിക്കരുത്.

8. പ്രശ്‌നപരിഹാരം

This section provides solutions to common issues. For complex problems, contact a licensed professional or Ranein customer support.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
No hot water or inconsistent temperatureLow water pressure, clogged filter, gas supply issue, error code displayed.Check water pressure. Clean the inlet water filter. Verify gas supply. Refer to the manual for specific error code meanings.
Unit displays an error code (e.g., Error 8)നിർദ്ദിഷ്ട സിസ്റ്റം തകരാറുകൾ.Consult the detailed troubleshooting section in the full user manual for the specific error code. Power cycling the unit (turning off and on) may resolve temporary issues.
Water not getting hot enoughIncorrect temperature setting, high flow rate exceeding unit capacity, mineral buildup.Adjust temperature setting. Reduce water flow if necessary. Perform annual flushing to remove mineral buildup.

9. വാറൻ്റിയും പിന്തുണയും

Ranein provides a 2-year free service warranty for this product, covering manufacturing defects and ensuring reliable operation. This warranty is in addition to the 8 types of security protection built into the unit.

For any questions, technical assistance, or warranty claims, please contact Ranein customer support. Refer to the contact information provided in your included user manual or visit the official Ranein webസൈറ്റ്.

Ranein customer support team with text 'We're Here For You 24/7'

Image: Ranein customer support team, emphasizing 24/7 availability for assistance.

അനുബന്ധ രേഖകൾ - ആർഎച്ച്8കെ-എൽപിജി

പ്രീview റാനെയിൻ 12L പ്രൊപ്പെയ്ൻ ടാങ്കില്ലാത്ത വാട്ടർ ഹീറ്റർ ഇൻസ്റ്റലേഷൻ മാനുവൽ
റാനെയിൻ 12L പ്രൊപ്പെയ്ൻ ഗ്യാസ് ടാങ്കില്ലാത്ത വാട്ടർ ഹീറ്ററിനായുള്ള ഇൻസ്റ്റലേഷൻ മാനുവൽ, ആവശ്യാനുസരണം ചൂടുവെള്ളത്തിന് 3.18 GPM വരെയും 68,000 BTU വരെയും നൽകുന്നു.
പ്രീview റാണെയിൻ ടാങ്ക്ലെസ് ഗ്യാസ് വാട്ടർ ഹീറ്റർ ഇൻസ്റ്റാളേഷനും ഉപയോഗ മാനുവലും
റാണീൻ RH8K-NG, RH8K-LPG ടാങ്ക്ലെസ് ഗ്യാസ് വാട്ടർ ഹീറ്ററുകൾക്കായുള്ള സമഗ്രമായ മാനുവൽ, ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സുരക്ഷാ മുൻകരുതലുകൾ, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview RANEIN ടാങ്കില്ലാത്ത വാട്ടർ ഹീറ്റർ ഉപയോക്തൃ ഗൈഡ്
RANEIN നാച്ചുറൽ ഗ്യാസ് ടാങ്ക്‌ലെസ് വാട്ടർ ഹീറ്റർ പ്രവർത്തിപ്പിക്കുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ ഈ ഗൈഡ് നൽകുന്നു, തൽക്ഷണ ഫ്ലോ ക്വറി, ക്യുമുലേറ്റീവ് ഫ്ലോ ക്വറി, ഫോർ സീസൺസ് ടെമ്പറേച്ചർ ഫംഗ്‌ഷൻ, കിച്ചൺ ഫംഗ്‌ഷൻ, ബാത്ത് ടബ് ഫംഗ്‌ഷൻ, ഹൈ-ടെമ്പറേച്ചർ ലോക്ക് ഫംഗ്‌ഷൻ തുടങ്ങിയ സവിശേഷതകൾ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview റാനെയിൻ RA65L RV ടാങ്ക്‌ലെസ് വാട്ടർ ഹീറ്റർ: ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സുരക്ഷാ മാനുവൽ
റാണീൻ RA65L RV ടാങ്ക്‌ലെസ് വാട്ടർ ഹീറ്ററിനായുള്ള സമഗ്രമായ ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സുരക്ഷാ മുൻകരുതലുകൾ, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു. RV ഉടമകൾക്കുള്ള അവശ്യ വിവരങ്ങൾ.
പ്രീview റാണെയിൻ റെസിഡൻഷ്യൽ ഇൻഡോർ ടാങ്ക്‌ലെസ് ഗ്യാസ് വാട്ടർ ഹീറ്റർ ഇൻസ്റ്റാളേഷനും ഉപയോഗ മാനുവലും
റാണെൻ റെസിഡൻഷ്യൽ ഇൻഡോർ ടാങ്ക്‌ലെസ് ഗ്യാസ് വാട്ടർ ഹീറ്റർ, മോഡലുകൾ RH10K-NG, RH10K-LPG എന്നിവയുടെ ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, പരിപാലനം എന്നിവയ്ക്കുള്ള സമഗ്രമായ നിർദ്ദേശങ്ങൾ ഈ മാനുവൽ നൽകുന്നു. സുരക്ഷിതവും കാര്യക്ഷമവുമായ ഉപയോഗം ഉറപ്പാക്കുന്നതിനുള്ള വിശദമായ സുരക്ഷാ മുന്നറിയിപ്പുകൾ, പ്രവർത്തന നടപടിക്രമങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview റാണീൻ ടാങ്കില്ലാത്ത ഇലക്ട്രിക് വാട്ടർ ഹീറ്ററുകൾ: ഇൻസ്റ്റാളേഷനും ഉപയോഗ മാനുവലും
റാണീൻ RE18K, RE27K ടാങ്കില്ലാത്ത ഇലക്ട്രിക് വാട്ടർ ഹീറ്ററുകൾക്കായുള്ള സമഗ്രമായ ഗൈഡ്, സുരക്ഷ, ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.