1. ആമുഖം
This manual provides detailed instructions for the assembly, operation, and maintenance of your Flieks Twin Platform Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2 സുരക്ഷാ വിവരങ്ങൾ
- അസംബ്ലി ചെയ്യുന്നതിന് മുമ്പ് എല്ലാ ഭാഗങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക. കേടായ ഭാഗങ്ങൾ ഉപയോഗിക്കരുത്.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Tighten all bolts and screws securely. Periodically check and re-tighten as needed.
- പരമാവധി ഭാര ശേഷി 350 പൗണ്ട് (158 കിലോഗ്രാം) കവിയരുത്.
- ശ്വാസംമുട്ടൽ അപകടങ്ങൾ തടയാൻ അസംബ്ലി സമയത്ത് ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Use only the recommended mattress thickness of 6 inches.
- Ensure electrical connections for the charging station and LED lights are properly installed and maintained. Do not overload the charging station.
3. പാക്കേജ് ഉള്ളടക്കം
Your Flieks Twin Platform Bed is shipped in 2 packages. Verify that all components listed below are present before starting assembly.
ഹാർഡ്വെയർ ലിസ്റ്റ്:
- Bolts (various sizes)
- സ്ക്രൂകൾ (വിവിധ വലുപ്പങ്ങൾ)
- വാഷറുകൾ
- അല്ലൻ റെഞ്ച്
- Other fasteners as specified in the assembly diagram.
ഘടക ലിസ്റ്റ്:
- Headboard (Upholstered with LED)
- Bed Frame Side Rails
- Bed Frame End Rails
- Storage Shelves (various pieces)
- Desk Components
- Drawer Components (2 drawers)
- Bed Slats (10 pieces)
- ചാർജിംഗ് സ്റ്റേഷൻ യൂണിറ്റ്
- അസംബ്ലി മാനുവൽ
Refer to the included assembly diagram for specific part identification and quantities.
4. അസംബ്ലി നിർദ്ദേശങ്ങൾ
Assembly typically requires two adults. Follow the steps sequentially for proper construction.
Step 1: Prepare the Area and Unpack
Clear a spacious area for assembly. Lay out all components and hardware on a soft, clean surface to prevent damage.
Image 1: Assembled Flieks Twin Platform Bed. This image provides an overview of the final product, showcasing the integrated storage shelves, desk, and LED-lit upholstered headboard.
Step 2: Assemble the Headboard and Storage Shelves
Attach the upholstered headboard to the main storage shelf unit. Secure all connections using the provided bolts and an Allen wrench. Ensure the LED strip and charging station wiring are accessible for later connection.
Image 2: Detail of the LED-lit upholstered headboard. This image highlights the padded headboard and the LED lighting strip within the upper shelf compartment.
Step 3: Construct the Bed Frame
Connect the side rails and end rails to form the main bed frame. Ensure all joints are flush and securely fastened. Do not fully tighten bolts until all frame components are aligned.
Step 4: Install the Desk Unit
Attach the desk components to the designated side of the bed frame and storage unit. Follow the specific diagrams for proper orientation and secure attachment.
Image 3: Integrated desk and side storage. This image illustrates the pull-out desk feature and the additional shelving located at the foot of the bed.
Step 5: Insert Bed Slats
Place the 10 bed slats across the bed frame. Secure them according to the instructions, typically by screwing them into the side rails. This provides support for the mattress.
Step 6: Assemble and Install Drawers
Assemble the two under-bed drawers following the provided diagrams. Once assembled, slide them into their designated compartments beneath the bed frame.
Image 4: Under-bed storage drawer. This image shows one of the two drawers fully extended, demonstrating the available storage capacity.
Step 7: Connect Charging Station and LED Lights
Carefully connect the charging station and LED light power cables to a suitable power outlet. Ensure all connections are secure and routed safely to avoid tripping hazards.
Image 5: Integrated charging station. This image provides a detailed view of the charging station, featuring two standard power outlets and two USB ports for electronic devices.
Step 8: Final Tightening and Inspection
Once all components are assembled, go back and fully tighten all bolts and screws. Inspect the entire bed for stability and ensure there are no loose parts. Place your mattress on the bed.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1 LED ലൈറ്റിംഗ്
The LED lights integrated into the headboard storage shelves can be controlled via a switch or remote (if included). Refer to the specific LED controller instructions for color changes, brightness adjustments, and mode selections.
5.2 ചാർജിംഗ് സ്റ്റേഷൻ
The charging station provides 2 standard plug outlets and 2 USB ports. Plug your electronic devices directly into these ports for convenient charging. Do not exceed the maximum power rating of the charging station.
5.3 Storage Drawers and Shelves
The two under-bed drawers and eight integrated storage shelves are designed for organizing personal items, books, and small electronics. Ensure items are placed securely to prevent them from falling or obstructing drawer movement.
5.4 Integrated Desk
The desk at the end of the bed can be used as a workspace or an additional shelf. Ensure the desk is stable before placing heavy items on it or using it for tasks requiring pressure.
6. പരിപാലനം
- വൃത്തിയാക്കൽ: Wipe wood surfaces with a soft, damp cloth. Avoid harsh chemicals. For the upholstered headboard, spot clean with a mild fabric cleaner as needed.
- ഹാർഡ്വെയർ പരിശോധന: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- ഇലക്ട്രിക്കൽ ഘടകങ്ങൾ: Ensure the charging station and LED wiring are free from damage. If any damage is observed, discontinue use and contact customer support.
- ഭാരം വിതരണം: Distribute weight evenly on the bed and shelves to prevent stress on the frame.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Bed feels wobbly after assembly. | അയഞ്ഞ ഹാർഡ്വെയർ. | എല്ലാ ബോൾട്ടുകളും സ്ക്രൂകളും പരിശോധിച്ച് മുറുക്കുക. എല്ലാ ഘടകങ്ങളും ശരിയായി വിന്യസിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. |
| ഡ്രോയറുകൾ സുഗമമായി സ്ലൈഡ് ചെയ്യുന്നില്ല. | Misaligned drawer slides or obstruction. | Verify drawer slides are correctly installed and aligned. Check for any items obstructing the drawer path. |
| എൽഇഡി ലൈറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല. | Power connection issue or faulty LED strip. | Ensure the power adapter is securely plugged into an active outlet. Check the LED controller for proper connection. If issues persist, contact support. |
| Charging station not providing power. | Power connection issue or overloaded circuit. | Verify the charging station is plugged into a live outlet. Ensure the total power draw of connected devices does not exceed the station's rating. Try a different outlet. |
8 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: N7090001046K-MZJ
- ബ്രാൻഡ്: ഫ്ലൈക്സ്
- മെറ്റീരിയൽ: Pine Wood, MDF, Linen
- വലിപ്പം: ഇരട്ട
- Overall Product Dimension: 98.4''L x 50.1''W x 40.4''H
- Twin Bed Dimensions: 75.4'' x 39.2''
- ആകെ ഉയരം: 40.4''
- Number of Bed Slats: 10
- ശുപാർശ ചെയ്യുന്ന മെത്തയുടെ കനം: 6''
- ആകെ ഉൽപ്പന്ന ഭാരം: 178 പൗണ്ട്
- Bed Weight Capacity: 350 പൗണ്ട്
- Number of Packages: 2
- അസംബ്ലി ആവശ്യമാണ്: അതെ
- ഉത്ഭവം: വിയറ്റ്നാം
- പ്രത്യേക സവിശേഷതകൾ: Upholstered Headboard, LED Lighting, 8 Storage Shelves, 2 Under-bed Drawers, Integrated Charging Station (2 AC outlets, 2 USB ports), Integrated Desk.
9. വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, missing parts, or any questions regarding your Flieks Twin Platform Bed, please contact Flieks customer service through your purchase platform or the official brand webസൈറ്റ്.
Please have your model number (N7090001046K-MZJ) and purchase date ready when contacting support.
