സൈൻലോജിക് ഓട്ടോമാറ്റിക് പ്ലാന്റ് വാട്ടറർ (മോഡൽ BSV-IC205S) ഉപയോക്തൃ മാനുവൽ

ആമുഖം

Thank you for choosing the Sainlogic Automatic Plant Waterer. This smart self-watering system is designed to provide precise and efficient irrigation for up to 15 potted plants, ensuring optimal moisture levels whether you are at home or away. Featuring a humidity monitor, programmable timer, and IP64 waterproof design, this system simplifies plant care and conserves water. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your device.

സുരക്ഷാ വിവരങ്ങൾ

പ്രധാനപ്പെട്ടത്: For external use only. Do not immerse the main control unit in water. Ensure all connections are secure to prevent leaks. Keep out of reach of children. Use only the provided Type-C cable for power. Do not attempt to modify or repair the device yourself.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Main Control Unit (Controller)
• 1 x ടൈപ്പ്-സി കേബിൾ
• 1 x 33ft (10m) Tubing
• 15 x T-Joints
• 15 x Drippers (Watering Stakes)
• 1 x ഫിൽട്ടർ
• 1 x Anti-Siphon Valve
• 1 x Soil Moisture Sensor (Humidity Detector)
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• Other accessories: 1 x Tubing Holder, 15 x Blue Wrenches, 2 x Screws, 2 x Wall Plugs

Image: All components included in the Sainlogic Automatic Plant Waterer kit, laid out on a white surface. This includes the main control unit, tubing, T-joints, drippers, filter, anti-siphon valve, soil moisture sensor, Type-C cable, and other small accessories.

പ്രധാന സവിശേഷതകൾ

• Smart Visual Moisture Monitoring: The 3.07-inch display shows real-time soil moisture levels. In Humidity Mode, the system automatically initiates watering when the soil is dry and stops when the display indicates "WET".
• Efficient Deep Root Irrigation: Designed to deliver water directly to plant roots, this system can save up to 80% more water compared to traditional surface watering methods. Supports up to 15 potted plants.
• IP64 വാട്ടർപ്രൂഫ് ഡിസൈൻ: The system is rated IP64 for full waterproof protection and incorporates anti-siphon technology to prevent leaks and backflow, making it suitable for various indoor and outdoor environments.
• വലിയ 3.07" LCD ഡിസ്പ്ലേ: Provides clear visibility of watering schedules, current time, battery capacity, and humidity status for easy monitoring and setup.
• പ്രോഗ്രാം ചെയ്യാവുന്ന ടൈമർ: Offers flexible timing options for scheduled watering, allowing customization based on plant needs and personal preferences.

സജ്ജീകരണ ഗൈഡ്

Follow these steps to set up your Sainlogic Automatic Plant Waterer:

1. Prepare the Water Source: Place a bucket or reservoir of water near your plants. Ensure the water source is lower than the anti-siphon valve's installation position to prevent backflow.
2. Connect the Filter: Attach the filter to one end of the tubing and place it into your water reservoir.
3. Connect Tubing to Control Unit: Insert the other end of the tubing into the "IN" port of the main control unit.
4. Install Drippers and T-Joints:
   • Measure and cut the tubing to the desired lengths to reach each plant.
   • Insert T-joints into the cut tubing sections to create branches for each plant.
   • Attach a dripper (watering stake) to the end of each branch and insert it into the soil of your potted plant, ensuring it reaches the root area.
5. Connect Soil Moisture Sensor: Plug the soil moisture sensor into the designated port on the control unit. Place the sensor into the soil of a representative plant to monitor its moisture level.
6. Position the Anti-Siphon Valve: The anti-siphon valve must be installed at the highest point of the entire irrigation system, above the water reservoir, to prevent water from continuously flowing due to siphoning.
7. പവർ ഓൺ: Connect the Type-C cable to the control unit and a suitable power adapter (not included). The device will power on and the display will activate.

Image: An illustration of the Sainlogic Automatic Plant Waterer system set up for multiple plants, showing the tubing connecting the water source to various potted plants, with drippers inserted into the soil. The main control unit is visible next to the water source.

Image: A diagram illustrating the correct placement of the anti-siphon valve, emphasizing that it must be positioned higher than the water source to prevent continuous water flow.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Sainlogic Automatic Plant Waterer offers two primary operating modes: Humidity Mode and Timing Mode.

നിയന്ത്രണ പാനൽ ഓവർview

Image: Close-up of the 3.07-inch LCD display on the Sainlogic control unit, highlighting different display areas such as mode, clock, battery, suspend indicator, humidity status, watering time, and interval time.

The control unit features a rotary dial and several buttons for navigation and setting adjustments:

• റോട്ടറി ഡയൽ: Used to select different settings (ON, OFF, SET CLOCK, START TIME, HOW LONG, HOW OFTEN).
• OK/C/S Button: Confirm selection, clear, or suspend.
• +/- ബട്ടണുകൾ: മൂല്യങ്ങൾ ക്രമീകരിക്കുക.
• Water Drop Button: മാനുവൽ നനവ്.
• പ്ലേ/താൽക്കാലികമായി നിർത്തുക ബട്ടൺ: Start/pause operation.

1. Humidity Mode (Smart Watering)

In Humidity Mode, the system uses the soil moisture sensor to detect the soil's moisture level. It will automatically initiate watering when the soil is dry and stop when the display shows "WET".

1. Ensure the soil moisture sensor is correctly placed in the soil of a plant.
2. Turn the rotary dial to the "Humidity" setting (if available, or ensure the system is in auto-detect mode).
3. The device will monitor the soil and water as needed. The maximum watering duration in this mode is 30 minutes to prevent overwatering.

Image: A visual representation of the Humidity Mode, showing the device detecting humidity and initiating smart watering on a schedule, with the display indicating "WET" when sufficient moisture is reached.

2. Timing Mode (Programmable Schedule)

In Timing Mode, you can set specific watering schedules based on time and frequency.

1. നിലവിലെ സമയം സജ്ജമാക്കുക: Turn the rotary dial to "SET CLOCK". Use the +/- buttons to set the current time and press OK to confirm.
2. Set First Watering Time: Turn the rotary dial to "START TIME". Use the +/- buttons to set the desired start time for watering and press OK.
3. വെള്ളമൊഴിക്കലിന്റെ ദൈർഘ്യം സജ്ജമാക്കുക: Turn the rotary dial to "HOW LONG". Use the +/- buttons to set the duration for each watering cycle (e.g., 15 seconds, 1 minute, up to 30 minutes) and press OK.
4. വെള്ളമൊഴിക്കുന്നതിന്റെ ആവൃത്തി സജ്ജമാക്കുക: Turn the rotary dial to "HOW OFTEN". Use the +/- buttons to set the interval between watering cycles (e.g., every 2 hours, every 1 day, up to 7 days) and press OK.
5. Activate Schedule: Turn the rotary dial to "ON" to activate the programmed schedule.

Image: A display showing a sample automatic watering schedule over several days, indicating the time, duration, and volume of water delivered for each watering event.

മാനുവൽ നനവ്

To manually water your plants, press the water drop button on the control unit. The system will water for a preset duration or until you press the button again to stop.

മെയിൻ്റനൻസ്

• ഫിൽട്ടർ വൃത്തിയാക്കുക: Regularly check and clean the water filter to prevent blockages and ensure consistent water flow.
• Inspect Tubing and Drippers: Periodically inspect the tubing and drippers for any kinks, blockages, or damage. Clean drippers if they become clogged.
• Monitor Water Reservoir: Ensure the water reservoir always has sufficient water, especially during extended periods of absence.
• ബാറ്ററി കെയർ: If the device uses internal batteries, ensure they are charged or replaced as needed. The display shows current battery capacity.
• സംഭരണം: When not in use for extended periods, drain the system, clean all components, and store them in a dry, cool place.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Sainlogic is committed to providing reliable products and excellent customer service. For any questions, technical support, or warranty inquiries, please contact us through the following channels:

• ഫോൺ പിന്തുണ: Available Monday to Friday, 10:00 AM to 6:00 PM (Eastern Time). Please refer to the official Sainlogic website for the current phone number.
• ഇമെയിൽ പിന്തുണ: We aim to respond to all email inquiries within 24 hours on weekdays and 48 hours on weekends.
• ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: സന്ദർശിക്കുക Sainlogic official webസൈറ്റ് for additional guides, FAQs, and support resources.

വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിൻ്റെ തെളിവ് സൂക്ഷിക്കുക.