GRAUGEAR USB4 M.2 SSD Enclosure (U4-40G01) Instruction Manual

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your GRAUGEAR USB4 M.2 SSD Enclosure, Model U4-40G01. This device is designed to convert an M.2 NVMe SSD into a portable external storage solution with high-speed data transfer capabilities.

Image: The GRAUGEAR USB4 M.2 SSD Enclosure (U4-40G01) shown with its accompanying USB-C cables.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• GRAUGEAR USB4 M.2 NVMe SSD Enclosure (U4-40G01)
• USB Type-C to Type-C Cable (40Gbps)
• 2x SSD Fixed Rubber Stoppers
• 2x Thermal Pads (various thicknesses)
• 2x M.2 SSD Length Extend Adapters
• ഉപയോക്തൃ മാനുവൽ
• സേവന കാർഡ്

സജ്ജമാക്കുക

Installing the M.2 NVMe SSD

എൻക്ലോഷറിൽ നിങ്ങളുടെ M.2 NVMe SSD ഇൻസ്റ്റാൾ ചെയ്യാൻ ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

1. Open the bottom cover: Gently slide the bottom cover of the enclosure in the direction indicated by the "OPEN" arrow until it detaches.
2. Insert the M.2 SSD: Carefully align your M.2 NVMe SSD with the M-Key slot inside the enclosure and insert it firmly. Secure the SSD in place using one of the provided fixed rubber stoppers.
3. തെർമൽ പാഡ് പ്രയോഗിക്കുക: Remove both protective films from a thermal pad. Place the thermal pad directly onto the installed M.2 SSD. This helps dissipate heat from the SSD to the aluminum enclosure.
4. Close the bottom cover: Realign the bottom cover and slide it back into place until it clicks securely.

Image: Step-by-step visual guide for the tool-free installation of an M.2 SSD, including opening the cover, inserting the SSD, applying the thermal pad, and closing the cover.

എസ്എസ്ഡി അനുയോജ്യത

The GRAUGEAR U4-40G01 enclosure is designed for M.2 NVMe SSDs with an M-Key interface. It supports various lengths including 2230, 2242, 2260, and 2280. The maximum supported capacity is 8TB.

പ്രധാനപ്പെട്ടത്: This enclosure is not compatible with SATA B-Key or B+M Key SSDs. Additionally, SSDs with pre-installed heatsinks are not supported due to space constraints and the enclosure's integrated cooling design.

Image: Visual representation of compatible M.2 NVMe SSD form factors (2230, 2242, 2260, 2280) and the required M-Key interface. It also highlights incompatible SATA SSDs and SSDs with heatsinks.

ഇൻസ്റ്റലേഷൻ വീഡിയോ ഗൈഡ്

For a visual guide on the installation process, please watch the official GRAUGEAR video below:

Operating the Enclosure

ഒരു ഹോസ്റ്റ് ഉപകരണത്തിലേക്ക് കണക്റ്റുചെയ്യുന്നു

Connect the GRAUGEAR U4-40G01 enclosure to your computer or compatible device using the provided USB Type-C cable. For optimal performance, ensure your host device's port supports USB4 or Thunderbolt 4. The enclosure is plug-and-play, requiring no additional drivers for basic functionality.

Image: The GRAUGEAR enclosure connected to a laptop, demonstrating its use as an external storage device with high-speed capabilities.

സിസ്റ്റം അനുയോജ്യത

The enclosure offers broad compatibility across various operating systems and devices:

• ഉപകരണങ്ങൾ: Desktop computers, laptops, smartphones, smart TVs, tablets, gaming consoles (e.g., PlayStation).
• ഓപ്പറേറ്റിംഗ് സിസ്റ്റങ്ങൾ: വിൻഡോസ്, മാകോസ്, ലിനക്സ്.
• ഇന്റർഫേസ് അനുയോജ്യത: USB4, Thunderbolt 5/4/3, and backward compatible with USB 3.2/USB 3.0.

For achieving the maximum 40Gbps transfer speeds, the host device must have a Thunderbolt 3, USB4, or higher port.

Image: A comprehensive chart detailing the wide range of devices and operating systems compatible with the GRAUGEAR USB4 M.2 SSD Enclosure, along with supported USB and Thunderbolt versions.

Recommended System Requirements for 40Gbps

Note: For 40Gbps, the host device requires Thunderbolt 3, USB4 or higher.

Performance Benchmarks (Example with Samsung 9100PRO 1TB SSD)

Note: Performance figures are based on internal testing with a Samsung 9100PRO 1TB SSD. Actual speeds may vary depending on the specific SSD, host system configuration, and other environmental factors.

മെയിൻ്റനൻസ്

The GRAUGEAR U4-40G01 features a fanless all-aluminum design for efficient heat dissipation and silent operation. Minimal maintenance is required to ensure optimal performance and longevity:

• വൃത്തിയാക്കൽ: Periodically wipe the exterior of the enclosure with a soft, dry cloth to remove dust and fingerprints. Avoid using liquid cleaners or abrasive materials.
• തെർമൽ മാനേജ്മെൻ്റ്: അലൂമിനിയം സി.asing acts as a heatsink. Ensure adequate airflow around the enclosure, especially during prolonged high-speed transfers, to facilitate heat dissipation.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Avoid exposing the enclosure to extreme temperatures, direct sunlight, high humidity, or dusty environments.
• കൈകാര്യം ചെയ്യൽ: While durable, avoid dropping or subjecting the enclosure to strong impacts, which could damage the internal SSD or components.

ട്രബിൾഷൂട്ടിംഗ്

Low Transfer Speeds

• Host Port Verification: Ensure your computer's USB port supports USB4 or Thunderbolt 4. Connecting to older USB standards (e.g., USB 3.2 Gen1/Gen2, USB 3.0) will limit speeds to their respective maximums (e.g., 5Gbps, 10Gbps, 20Gbps).
• SSD പ്രകടനം: The actual speed is limited by the installed M.2 NVMe SSD. For speeds exceeding 3000MB/s, a high-performance PCIe Gen4 NVMe SSD is recommended.
• കേബിൾ നിലവാരം: Use the provided high-quality USB Type-C cable. Lower quality or longer cables can degrade performance.
• തെർമൽ ത്രോട്ടിലിംഗ്: Although designed for efficient cooling, prolonged heavy workloads can cause the SSD to heat up. Ensure the thermal pad is correctly installed and the enclosure has adequate ventilation.

ഡ്രൈവ് കണ്ടെത്തിയില്ല

• SSD Seating: Re-open the enclosure and ensure the M.2 SSD is fully and correctly seated in its slot, secured by the rubber stopper.
• കേബിൾ കണക്ഷൻ: Verify that the USB cable is securely connected to both the enclosure and the host device.
• Disk Initialization/Formatting: For new SSDs, the drive may need to be initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (macOS) before it appears in File എക്സ്പ്ലോറർ/ഫൈൻഡർ.
• Test with Another Port/Device: Try connecting the enclosure to a different USB port on your computer or to another compatible device to determine if the issue is with the port or the enclosure itself.

സാങ്കേതിക സവിശേഷതകൾ

• മോഡൽ: U4-40G01
• ബ്രാൻഡ്: ഗ്രൗഗെയർ
• ഇൻ്റർഫേസ്: USB4 / Thunderbolt 4 (backward compatible with USB 3.2/3.0)
• എസ്എസ്ഡി അനുയോജ്യത: M.2 NVMe (M-Key) 2230/2242/2260/2280
• Max Digital Storage Capacity: 8 ടി.ബി
• ട്രാൻസ്ഫർ വേഗത: Up to 40Gbps (theoretical), 3000-3500MB/s (actual read/write with PCIe Gen4 NVMe)
• മെറ്റീരിയൽ: അലുമിനിയം അലോയ്
• തണുപ്പിക്കൽ: Fanless design with double heat dissipation (aluminum housing and thermal pad)
• പ്രത്യേക സവിശേഷതകൾ: Tool-free installation, UASP support, TRIM support
• അളവുകൾ: 6.34 x 4.29 x 1.46 ഇഞ്ച്
• ഇനത്തിൻ്റെ ഭാരം: 9 ഔൺസ്
• ഇൻസ്റ്റലേഷൻ തരം: ബാഹ്യ ഹാർഡ് ഡ്രൈവ്
• നിറം: കറുപ്പ്
• നിർമ്മാതാവ്: CHAB GmbH
• ആദ്യം ലഭ്യമായ തീയതി: സെപ്റ്റംബർ 5, 2025

വാറൻ്റിയും പിന്തുണയും

GRAUGEAR products are manufactured to high-quality standards and are designed for reliable performance. For specific warranty terms and conditions, please refer to the included Service Card or the official GRAUGEAR webസൈറ്റ്.

Should you encounter any issues or require technical assistance, please contact GRAUGEAR support using the information below:

• ഫോൺ: +49 40 700 744 928
• ഇമെയിൽ: support@graugear.de
• വിലാസം: CHAB GmbH, Oststrasse 7, 22869 Schenefeld, Germany
• Webസൈറ്റ്: www.graugear.de