കോസ്കോ കിഡ്‌സ് ഫിനാലെ DX 2-ഇൻ-1 ബൂസ്റ്റർ കാർ സീറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

This manual provides essential information for the safe and proper installation, use, and maintenance of your Cosco Kids Finale DX 2-in-1 Booster Car Seat. Please read all instructions carefully before using the product and keep this manual for future reference. The Finale DX is designed to adapt as your child grows, offering two modes of use: a forward-facing harness booster and a belt-positioning booster.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Cosco Kids Finale DX 2-in-1 Booster Car Seat is a versatile child restraint system. It features a lightweight design for easy transfer between vehicles and a narrow profile that allows for three-across seating in most vehicles. Key features include a 5-point safety harness for younger children and a belt-positioning mode for older children, along with removable, dishwasher-safe cup holders.

ചിത്രം 1: ഫ്രണ്ട് view of the Cosco Kids Finale DX 2-in-1 Booster Car Seat.

സുരക്ഷാ വിവരങ്ങൾ

• Always read and follow all instructions in this manual and your vehicle owner's manual.
• Ensure the car seat is properly installed and secured before each use.
• ഒരു കുട്ടിയെയും കാർ സീറ്റിൽ ശ്രദ്ധിക്കാതെ വിടരുത്.
• The car seat meets or exceeds Federal Safety Standards.
• Do not use this car seat if it has been involved in a moderate to severe crash, even if there is no visible damage.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ഉപയോഗ രീതികൾ:

• Forward-Facing Harness Booster: For children weighing 40-65 lbs and measuring 43.4"-49" in height.
• Belt-Positioning Booster: For children weighing 40-100 lbs and measuring 43.4"-52" in height.

പൊതു ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ:

1. Place the car seat on the vehicle seat, ensuring at least 80% of the car seat base is on the vehicle seat.
2. Route the vehicle's seat belt through the designated belt path for the chosen mode of use.
3. Buckle the vehicle seat belt and remove all slack to ensure a tight fit. The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.
4. Attach and tighten the top tether strap to the vehicle's tether anchor point, if applicable for the installation mode.

വിഷ്വൽ ഗൈഡ്:

ചിത്രം 2: മുൻഭാഗം view of the car seat, highlighting the harness system.

ചിത്രം 3: വശം view of the car seat, showing its profile and headrest.

ചിത്രം 4: പിൻഭാഗം view of the car seat, illustrating the back structure.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Securing Your Child in Harness Mode:

1. Place your child in the car seat with their back flat against the seat back.
2. Bring the harness straps over your child's shoulders. Ensure the harness straps are at or above your child's shoulders for forward-facing use.
3. Buckle the crotch buckle between your child's legs.
4. Connect the chest clip at armpit level.
5. Tighten the harness straps until snug. Perform the "Pinch Test": if you can pinch any excess webbing at your child's shoulder, the harness is too loose and needs further tightening.

ചിത്രം 5: A child properly secured in the car seat using the 5-point harness.

ചിത്രം 6: A child demonstrating how to buckle the seat belt in booster mode.

Using in Belt-Positioning Booster Mode:

1. Remove the 5-point harness system as instructed in the full product manual.
2. നിങ്ങളുടെ കുട്ടിയെ ബൂസ്റ്റർ സീറ്റിൽ ഇരുത്തുക.
3. Route the vehicle's lap and shoulder belt over your child and through the designated belt guides on the booster seat.
4. Ensure the lap belt lies low across the hips, touching the thighs, and the shoulder belt rests snugly across the center of the child's shoulder and chest.
5. Buckle the vehicle seat belt and remove all slack.

ചിത്രം 7: A child seated in the belt-positioning booster mode, secured by the vehicle's seat belt.

മെയിൻ്റനൻസ്

• സീറ്റ് പാഡ്: The removable seat pad is machine-washable and dryer-safe. Refer to the care label for specific washing instructions.
• കപ്പ് ഹോൾഡർമാർ: The removable cup holders are dishwasher-safe for easy cleaning.
• ഹാർനെസ് സ്ട്രാപ്പുകൾ: പരസ്യം ഉപയോഗിച്ച് ഹാർനെസ് സ്ട്രാപ്പുകൾ തുടയ്ക്കുകamp cloth. Do not machine wash or immerse in water, as this may weaken the webബിംഗ്.
• പ്ലാസ്റ്റിക്/ലോഹ ഭാഗങ്ങൾ: പരസ്യം ഉപയോഗിച്ച് പ്ലാസ്റ്റിക്, ലോഹ ഭാഗങ്ങൾ തുടയ്ക്കുകamp തുണിയും വീര്യം കുറഞ്ഞ സോപ്പും.

ചിത്രം 8: The removable cup holder, designed for easy cleaning.

ട്രബിൾഷൂട്ടിംഗ്

• ഇൻസ്റ്റാളേഷന് ശേഷം കാർ സീറ്റ് അയഞ്ഞിരിക്കുന്നു: Ensure all slack is removed from the vehicle seat belt. Press down firmly on the car seat while tightening the belt. Re-check for movement (should not move more than 1 inch).
• Harness Straps are Difficult to Adjust: ഹാർനെസിൽ എന്തെങ്കിലും വളവുകൾ ഉണ്ടോയെന്ന് പരിശോധിക്കുക. webbing. Ensure the harness adjuster strap is pulled straight out from the car seat.
• Child's Head is Slumping: Ensure the headrest is adjusted to the correct height for your child. For forward-facing, the harness straps should be at or above the shoulders.
• Cup Holder Not Fitting: Ensure the cup holder is correctly aligned with its slot and pushed firmly into place.

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 9: Product dimensions for the Cosco Kids Finale DX 2-in-1 Booster Car Seat.

വാറൻ്റിയും പിന്തുണയും

For warranty information or product support, please contact Cosco customer service. Details can typically be found on the product's registration card or the manufacturer's official webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

നിർമ്മാതാവ്: കോസ്കോ