Aideepen NerdMiner V2 ESP32 ഡെവലപ്‌മെന്റ് ബോർഡ് ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

The Aideepen NerdMiner V2 ESP32 Development Board is a compact, open-source device designed for Bitcoin mining. It features an ESP32-D0WD-V3 WiFi MCU and a 2.8-inch touch screen for displaying operational status and related information. This manual provides instructions for setup, operation, maintenance, and troubleshooting.

Figure 1: NerdMiner V2 ESP32 Development Board and Accessories

2. ഉൽപ്പന്ന ഘടകങ്ങൾ

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉൾപ്പെടുന്നു:

• NerdMiner V2 ESP32 Development Board with 2.8-inch Smart Display
• Acrylic Case (may require assembly)
• യുഎസ്ബി-സി കേബിൾ
• സ്റ്റൈലസ്
• ജമ്പർ വയറുകൾ

ചിത്രം 2: ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

3.1. Case Assembly

If your device arrived unassembled, follow these steps to install the acrylic case:

1. Carefully place the ESP32 board into the bottom acrylic plate.
2. Align the top acrylic plate and secure it with the provided screws.
3. Ensure all ports and buttons are accessible.

3.2. പ്രാരംഭ കോൺഫിഗറേഷൻ

The device operates independently via WiFi. Follow these steps for initial setup:

1. പവർ ഓൺ: Connect the device to a power source using the USB-C cable. Upon powering on, the device attempts to connect to a previously configured WiFi network.
2. Access Point Setup: If WiFi connection fails after 15 seconds, the device automatically enters configuration mode. ഇതിനായി തിരയുക the free access point named nmap-2.4g (no password required) on your mobile device or computer.
3. കോൺഫിഗറേഷൻ ഇന്റർഫേസ്:
   • മൊബൈൽ ഉപകരണങ്ങൾ: നിങ്ങളെ കോൺഫിഗറേഷൻ പേജിലേക്ക് സ്വയമേവ റീഡയറക്‌ടുചെയ്യും.
   • PC/Desktop: നാവിഗേറ്റ് ചെയ്യുക http://192.168.4.1 നിങ്ങളുടെ web ബ്രൗസർ.
4. ക്രമീകരണങ്ങൾ നൽകുക: On the configuration page, you will need to input your WiFi password, primary and fallback pool URLs, and your Bitcoin address. You can also adjust settings like time zone, UI refresh interval, screen sleep timeout, and initial screen brightness.

Figure 3: Configuration Page Example

For detailed firmware activation and upgrade instructions, refer to the official GitHub repository: https://github.com/NMminer1024/NMMiner.

4. ഉപകരണം പ്രവർത്തിപ്പിക്കുന്നു

Once configured, the NerdMiner V2 operates autonomously, displaying real-time mining statistics on its 2.8-inch touch screen.

4.1. വിവരങ്ങൾ പ്രദർശിപ്പിക്കുക

The display provides a comprehensive overview of the device's status and mining performance:

Figure 4: Display Elements Explained

• Block Found: Indicates if a Bitcoin block has been found.
• ഫേംവെയർ പതിപ്പ്: നിലവിലെ സോഫ്‌റ്റ്‌വെയർ പതിപ്പ്.
• പ്രാദേശിക IP: Device's IP address on the local network.
• Best Difficulty of Miners in LAN: The highest difficulty achieved by miners on the local network.
• Counter of Miners in LAN: Number of active miners on the local network.
• ഹാഷ് നിരക്ക്: Current mining speed in KH/s.
• Total Hash Rate of Miners in LAN: Aggregate mining speed of all local miners.
• WiFi RSSI: Signal strength of the WiFi connection.
• BTC Price: Real-time Bitcoin price.
• Job Receive Counter: Number of mining jobs received.
• Network Difficulty: Current difficulty of the Bitcoin network.
• Last Share Diff/Best Diff: Difficulty of the last submitted share and the best difficulty achieved.
• Share (rejective) / Share (accept): Ratio of rejected to accepted shares.

4.2. പ്രകടനം

The device is designed for optimal performance with an open-source, deeply optimized algorithm firmware, achieving a maximum computing power of 980KH/s to 1000KH/s.

Figure 5: Hashrate Performance

5. പരിപാലനം

To ensure the longevity and optimal performance of your NerdMiner V2, consider the following maintenance tips:

• വൃത്തിയാക്കൽ: Gently wipe the screen and case with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• പരിസ്ഥിതി: Operate the device in a cool, dry environment away from direct sunlight and excessive dust.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Regularly check the official GitHub repository for firmware updates to ensure the device runs with the latest optimizations and features.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your NerdMiner V2, refer to the following common problems and solutions:

• Device Restarts Multiple Times Upon Powering On:
  This may indicate an insufficient power supply. Try using an alternative power adapter, such as a 5V 2A model. Ensure the USB-C cable is securely connected.
• Unable to Connect to WiFi or Configuration Page:
  Ensure the device is in configuration mode (if not, power cycle it). Double-check that you are connecting to the correct access point (nmap-2.4g) and that your device's WiFi is enabled. If using a PC, verify the IP address 192.168.4.1 ശരിയായി നൽകിയിട്ടുണ്ട്.
• Device Keeps Cycling Through Settings / Not Saving Configuration:
  This can also be related to power supply issues. Ensure you are using a stable 5V 2A power source. Re-enter your settings carefully and ensure you click 'Save' on the configuration page.
• Firmware Activation or Upgrade Issues:
  Refer to the official GitHub repository (https://github.com/NMminer1024/NMMiner) for detailed instructions and tools. If issues persist, contact customer support for assistance.
• Missing Acrylic Case Components:
  While the product description states the board and shell are included, if you find components missing, contact Aideepen customer service for resolution.

7 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications of the Aideepen NerdMiner V2 ESP32 Development Board:

Figure 6: Board Interfaces

Figure 7: Device Dimensions

8. വാറൻ്റിയും പിന്തുണയും

8.1. വാറൻ്റി വിവരങ്ങൾ

Each product purchased from Aideepen includes 24 months of service. In the event of any quality issues with your item, you are eligible for a new replacement.

8.2. ഉപഭോക്തൃ പിന്തുണ

For any questions, technical assistance, or after-sales guidance, please contact Aideepen customer service. We are committed to providing swift resolution and comprehensive support.