ഹെഡ് റാപ്‌റ്റർ WCR 140S സ്കീ ബൂട്ട് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

This manual provides essential information for the proper setup, operation, and maintenance of your HEAD Raptor WCR 140S ski boots. Designed for high-performance alpine skiing, these boots feature innovative thermoplastic construction for absorption, a 96-mm last, deep heel pocket, and a long toe box for precise control. Understanding these instructions will help ensure optimal performance and longevity of your ski boots.

ഉൽപ്പന്നം കഴിഞ്ഞുview

ചിത്രം 1: The HEAD Raptor WCR 140S ski boot. This image displays the overall design, including the four micro-adjustable buckles, power strap, and the 'Raptor WCR' branding on the side.

The HEAD Raptor WCR 140S ski boot is engineered for competitive and advanced skiers. Key features include:

• ഷെൽ: Constructed with innovative thermoplastic for enhanced absorption and responsiveness.
• അവസാനം: 96-mm width, providing a precise and performance-oriented fit.
• ലൈനർ: WCR Pro liner, customizable with Liquid Fit technology, an adjustable tongue, and a double power booster Velcro strap for a secure and comfortable fit.
• ബക്കിളുകൾ: Four micro-adjustable low-profile Spineflex racing alloy buckles for precise closure.
• ഫ്ലെക്സ്: Adjustable flex from 150 to 140, allowing customization for different skiing styles and conditions.
• സോൾ: FIS-approved sole for compliance with racing regulations.

സജ്ജീകരണവും ക്രമീകരണവും

1. Putting on the Boots

1. എല്ലാ ബക്കിളുകളും ലോക്ക് ചെയ്തിട്ടില്ലെന്നും പവർ സ്ട്രാപ്പ് അയഞ്ഞിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
2. Pull the tongue forward and outward to create space for your foot.
3. Slide your foot into the boot, ensuring your heel is seated firmly in the heel pocket.
4. നിങ്ങളുടെ കാൽ പൂർണ്ണമായും നിവർന്നു നിൽക്കാൻ കുതികാൽ നിലത്ത് കുറച്ച് തവണ അമർത്തുക.

2. Buckle Adjustment

The four micro-adjustable low-profile Spineflex buckles allow for precise tensioning. Start by closing the buckles loosely, then progressively tighten them from the bottom (forefoot) upwards (cuff). The Spineflex design ensures even pressure distribution.

• Forefoot Buckles: Secure the foot over the instep without causing pressure points.
• Cuff Buckles: Provide support and control around the lower leg. Do not overtighten, as this can restrict circulation.
• Micro-Adjustment: Rotate the buckle levers to fine-tune the tension.

3. Power Strap Adjustment

The double power booster Velcro strap at the top of the cuff provides additional support and responsiveness. Tighten it firmly but comfortably to enhance power transmission to your skis.

4. Flex Adjustment

The Raptor WCR 140S offers an adjustable flex from 150 to 140. This adjustment typically involves a mechanism on the rear of the cuff or side of the shell. Refer to the specific markings on your boot for detailed instructions on how to change the flex setting to match your preference and skiing conditions.

5. Liner Customization (Liquid Fit)

The WCR Pro liner features Liquid Fit technology, allowing for personalized fit around the ankle and heel. This process is usually performed by an authorized HEAD dealer. Consult your dealer for professional liner customization to achieve the best possible fit and comfort.

Operating the Ski Boots

Once properly adjusted, your HEAD Raptor WCR 140S boots are ready for skiing. These boots are designed to provide maximum power transmission and control for aggressive skiing.

• ഫോർവേഡ് ലീൻ: The boot's design promotes an aggressive forward lean, crucial for modern ski technique.
• FIS-Approved Sole: Ensures compatibility and performance on race courses.
• Flex-Performance Tuning: Provides a consistent and powerful flex for dynamic skiing.
• Rear-Support Tuning: Enhances rearward support, critical for maintaining balance and control at high speeds.
• Toe Articulation: The long toe box allows for natural toe articulation, improving feel and control.

Always ensure your ski bindings are correctly adjusted by a certified technician to match your boots and personal settings before skiing.

പരിപാലനവും പരിചരണവും

Proper maintenance will extend the life of your ski boots and ensure consistent performance.

• വൃത്തിയാക്കൽ: After each use, wipe down the exterior of the boots with a damp cloth to remove dirt, snow, and salt. Avoid harsh chemicals.
• ഉണക്കൽ: Remove the liners and footbeds to allow them to air dry completely. Do not use direct heat sources like radiators or open flames, as this can damage the liner and shell material. A boot dryer with gentle heat is acceptable.
• സംഭരണം: Store boots in a cool, dry place away from direct sunlight. Buckle the boots loosely to maintain their shape during storage.
• Buckles and Straps: Periodically check buckles and straps for wear and tear. Ensure all screws are tight. Replace any damaged components immediately.
• സോൾസ്: Inspect the soles for excessive wear, especially around the toe and heel pieces, which are critical for binding release. Replace worn sole parts as needed.

ട്രബിൾഷൂട്ടിംഗ്

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങൾക്കുള്ള പരിഹാരങ്ങൾ ഇതാ:

• Discomfort or Pressure Points:
  • ബക്കിളുകൾ അമിതമായി മുറുകുന്നില്ലെന്ന് ഉറപ്പാക്കുക.
  • Check sock thickness and fit.
  • Consider professional liner customization (Liquid Fit) or custom footbeds.
  • Consult a boot fitter for shell modification if necessary.
• Loose Fit / Heel Lift:
  • Tighten buckles, especially the instep and cuff buckles.
  • പവർ സ്ട്രാപ്പ് നന്നായി മുറുകെ പിടിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Consider professional liner customization (Liquid Fit) to fill voids around the ankle.
  • Check if the boot size is appropriate (refer to size chart).
• Difficulty Getting Boots On/Off:
  • Ensure all buckles are fully unlatched and the power strap is completely loosened.
  • Pull the tongue forward and outward as much as possible.
  • Warm the boots slightly (e.g., indoors) before putting them on, as cold plastic is less flexible.

സ്പെസിഫിക്കേഷനുകൾ

Ski Boot Size Chart

ചിത്രം 2: A comprehensive ski boot size conversion chart, showing equivalent sizes across EURO, US, UK, and Mondo Point systems, along with corresponding boot sole lengths. Use this chart to determine the correct boot size.

Refer to the size chart above to ensure you have the correct boot size. Mondo Point is the standard measurement for ski boots.

വാറൻ്റിയും പിന്തുണയും

For detailed warranty information regarding your HEAD Raptor WCR 140S ski boots, please refer to the official HEAD website or contact an authorized HEAD dealer. Warranty terms and conditions may vary by region and retailer.

If you require technical support, service, or have questions about your product, please visit the official HEAD webസൈറ്റ് സന്ദർശിക്കുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും HEAD Store on Amazon കൂടുതൽ ഉൽപ്പന്ന വിവരങ്ങൾക്ക്.