YESWELDER Replacement Lenses Instruction Manual

ആമുഖം

This manual provides instructions for the proper installation, use, and maintenance of your YESWELDER Blue Light Blocking Outer and Inner Replacement Lenses. These lenses are specifically designed for compatibility with YESWELDER LYG-M800H and 17800F welding helmets. Adhering to these instructions will ensure optimal performance and longevity of the product.

സുരക്ഷാ വിവരങ്ങൾ

• Always ensure your welding helmet is turned off and disconnected from any power source before attempting to replace lenses.
• Wear appropriate personal protective equipment (PPE), such as gloves, when handling lenses to prevent fingerprints and scratches.
• Inspect new lenses for any defects or damage before installation. Do not use damaged lenses.
• These lenses are replacement parts for specific welding helmets. They do not provide primary eye protection on their own. Always use them in conjunction with a functional welding helmet.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 5 x Blue Light Blocking Outer Replacement Lenses (5.23'' x 4.72'', thickness: 0.04'')
• 2 x Inner Replacement Lenses (4.05'' x 3.85'', thickness: 0.04'')

Image: Contents of the YESWELDER replacement lens package, showing multiple outer and inner lenses.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to correctly install the replacement lenses into your YESWELDER LYG-M800H or 17800F welding helmet.

1. ഹെൽമെറ്റ് തയ്യാറാക്കുക: Open the front cover of your welding helmet. Locate the existing outer and inner lenses.
2. Remove Old Lenses: Carefully unclip or slide out the worn or damaged outer and inner lenses from their respective slots. Dispose of old lenses responsibly.
3. Prepare New Lenses: പ്രധാനപ്പെട്ടത്: Both sides of the new lenses are protected by a thin plastic film. Gently peel off this protective film from both surfaces of each new lens (outer and inner) before installation. Failure to remove the film will result in blurry vision.
4. Install Inner Lens: Slide the new inner replacement lens into the designated inner slot of the helmet. Ensure it sits flush and securely.
5. Install Outer Lens: Slide the new blue light blocking outer replacement lens into the outer slot. Ensure it is properly seated and secured by the helmet's retaining clips or frame.
6. Close Helmet Cover: Close the front cover of the welding helmet, ensuring all components are securely in place.
7. പ്രവർത്തനക്ഷമത പരിശോധന: Before welding, perform a quick visual check to ensure clear vision through the lenses and that they are free from dust or smudges.

പ്രവർത്തിക്കുന്നു

Once installed, the blue light blocking outer lenses provide advanced eye protection by filtering out harmful high-energy blue light rays, while allowing less harmful portions of the blue light spectrum to pass through. This technology is designed to enhance eye comfort and safety during extended welding sessions. The inner lenses provide an additional layer of protection and clarity.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Clean lenses regularly with a soft, lint-free cloth and a mild lens cleaning solution. Avoid abrasive materials or harsh chemicals that can scratch or damage the lens coating.
• പരിശോധന: Periodically inspect both outer and inner lenses for scratches, cracks, or excessive spatter buildup. Replace lenses immediately if they show signs of damage that could impair vision or protection.
• സംഭരണം: Store unused replacement lenses in their original packaging or a clean, dry, and protected environment to prevent scratches and dust accumulation.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• Outer Lens Dimensions: 5.23 ഇഞ്ച് x 4.72 ഇഞ്ച്
• Outer Lens Thickness: 0.04 ഇഞ്ച്
• Inner Lens Dimensions: 4.05 ഇഞ്ച് x 3.85 ഇഞ്ച്
• Inner Lens Thickness: 0.04 ഇഞ്ച്
• അനുയോജ്യത: YESWELDER LYG-M800H and 17800F Welding Helmets
• സവിശേഷത: Blue Light Blocking Technology (Outer Lenses)
• ഇനത്തിൻ്റെ ഭാരം (പാക്കേജ്): ഏകദേശം 4.6 ഔൺസ്
• പാക്കേജ് അളവുകൾ: 5.39 x 4.76 x 0.39 ഇഞ്ച്

വാറൻ്റി

For detailed warranty information regarding your YESWELDER replacement lenses, please refer to the official YESWELDER webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി നിബന്ധനകളും വ്യവസ്ഥകളും വ്യത്യാസപ്പെടാം.

പിന്തുണ

If you require further assistance or have questions not covered in this manual, please contact YESWELDER customer support through their official webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങൾ ഉൽപ്പന്നം വാങ്ങിയ റീട്ടെയിലർ.

Webസൈറ്റ്: Visit the YESWELDER Store on Amazon