ATOMSTACK Swift Mini Laser Engraver 3W Instruction Manual

1. ആമുഖവും അവസാനവുംview

The ATOMSTACK Swift Mini Laser Engraver 3W is a compact, pre-assembled desktop laser engraving and cutting machine designed for beginners, hobbyists, and small businesses. With its user-friendly design and high precision, it's ideal for a wide range of creative projects on various materials.

Key features include a 135x145mm workspace, an ultra-fine 0.04mm laser spot, and a high engraving speed of up to 12000mm/min. It offers versatile connectivity options including WiFi, Hotspot, and USB, supported by the ATOMSTACK APP, LightBurn, and LaserGRBL software.

Image 1.1: The ATOMSTACK Swift Mini Laser Engraver 3W, a compact and versatile desktop laser machine.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Laser engravers emit powerful laser beams that can cause severe eye damage and burns. Always follow safety guidelines.

• Always wear the provided safety glasses when operating the laser engraver.
• ലേസർ ബീമിലേക്കോ അതിന്റെ പ്രതിഫലനത്തിലേക്കോ ഒരിക്കലും നേരിട്ട് നോക്കരുത്.
• Ensure the work area is well-ventilated to dissipate fumes from engraving.
• The device includes built-in flame detection and tip-over protection for enhanced safety.
• Do not engrave highly reflective materials without proper precautions.

Image 2.1: The ATOMSTACK Swift Mini features an eye protection design with a magnetic filter cover that blocks 97% of intense light. This cover is easily disassembled for cleaning, ensuring strong eye protection and convenience during operation.

3. പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• ATOMSTACK Swift Mini Laser Engraver Body (3000mW)
• ലേസർ മൊഡ്യൂൾ
• സുരക്ഷാ ഗ്ലാസുകൾ
• പവർ അഡാപ്റ്റർ
• USB കേബിൾ
• ടൈമിംഗ് ബെൽറ്റ്
• റെഞ്ച്
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

4. സജ്ജീകരണം

The ATOMSTACK Swift Mini comes 100% pre-assembled, allowing for immediate use right out of the box. No tools or complex assembly are required for the main unit.

4.1 ലേസർ മൊഡ്യൂൾ ഇൻസ്റ്റലേഷൻ

1. Carefully insert the laser module into its designated slot on the engraver body.
2. Secure the laser module using the provided thumb screws or wrench, ensuring it is firmly in place.
3. Connect the laser module's cable to the corresponding port on the engraver body.

4.2 ഫോക്കസ് അഡ്ജസ്റ്റ്മെന്റ്

The laser module features a built-in focus gauge for easy adjustment:

1. Place your material on the engraving platform.
2. Lower the focus arm on the side of the laser shroud until it touches the material surface.
3. Loosen the thumb screw on the laser module and adjust the height of the laser until it just touches the material.
4. Tighten the thumb screw to secure the laser module's height.
5. Flip the focusing arm back up.

4.3 സോഫ്റ്റ്‌വെയറും കണക്റ്റിവിറ്റിയും

For computer connectivity, you may need to install the CH340 USB driver. A link for this driver can typically be found on the ATOMSTACK official website or in the product's support documentation.

• യുഎസ്ബി കേബിൾ വഴി എൻഗ്രേവറിനെ നിങ്ങളുടെ കമ്പ്യൂട്ടറുമായി ബന്ധിപ്പിക്കുക.
• Alternatively, connect via WiFi or Hotspot mode using the ATOMSTACK APP.

Video 4.1: This video demonstrates the quick and easy setup process for the AtomStack Swift Mini, highlighting its pre-assembled design and simple laser module installation. It also shows the initial connection to software.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 അനുയോജ്യമായ സോഫ്റ്റ്‌വെയർ

The ATOMSTACK Swift Mini is compatible with popular laser software:

• ലൈറ്റ് ബേൺ: A powerful layout, editing, and control software for laser cutters (paid license required).
• ലേസർജിആർബിഎൽ: A free, open-source Windows software for image laser engraving.
• ATOMSTACK APP (BurnLab): A free mobile application for Windows, macOS, Android, and iOS, offering effortless operation and AI image generation.

Image 5.1: The ATOMSTACK Swift Mini is compatible with powerful in-house software, free to use and ready to connect on any platform, supporting Windows, macOS, Android, and iOS via WiFi, hotspot, or cable.

5.2 മെറ്റീരിയൽ തയ്യാറാക്കൽ

The engraver supports a wide range of materials:

• കൊത്തുപണി: Wood, bamboo, paper, leather, cardboard, cork, slate, felt, MDF, coated metal, dark acrylic.
• മുറിക്കൽ: Thin wood, paper, felt, dark acrylic.

To prepare your material:

1. Place the material flat on the engraving platform.
2. If the material is lightweight or prone to shifting, use painter's tape to secure it to the platform.
3. Adjust the laser focus as described in Section 4.2.

Image 5.2: The ATOMSTACK Swift Mini is a versatile all-in-one tool that effortlessly handles common materials such as wood, bamboo, leather, stone, ceramics, paper, leaves, felt, and coated metal.

5.3 കൊത്തുപണി പ്രക്രിയ

Follow these general steps to engrave your design:

1. Load Material & Set Focus: Place and secure your material, then adjust the laser focus.
2. Import Graphic: Open your chosen software (ATOMSTACK APP, LightBurn, or LaserGRBL) and import your desired graphic image.
3. Set Speed & Power: Adjust the engraving speed (e.g., 12000mm/min) and laser power (e.g., 100%) according to your material and desired effect.
4. കൊത്തുപണി ആരംഭിക്കുക: Ensure you are wearing safety glasses, then click the 'Start' button in the software to begin the engraving process.

Video 5.3: This video showcases the ATOMSTACK Swift Mini Portable Laser Engraver in action, demonstrating its ease of use for DIY projects and highlighting the precision of its engraving capabilities on various materials.

6. പരിപാലനം

Regular maintenance ensures optimal performance and longevity of your engraver:

• The magnetic filter cover on the laser module can be easily disassembled for cleaning. Regularly clean the lens and surrounding area to maintain laser performance.
• Keep the rails and moving parts free of dust and debris.

7. പ്രശ്‌നപരിഹാരം

നിങ്ങൾക്ക് പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന കാര്യങ്ങൾ പരിഗണിക്കുക:

• കണക്റ്റിവിറ്റി പ്രശ്നങ്ങൾ: Ensure the CH340 USB driver is correctly installed. Check WiFi/Hotspot connections.
• മോശം കൊത്തുപണി നിലവാരം: Verify the laser focus is correctly set. Adjust speed and power settings for your specific material. Ensure the material is flat and secure.
• മെഷീൻ പ്രതികരിക്കുന്നില്ല: Check all cable connections (USB, power). Restart the software and the engraver.
• Resume Engraving: The device supports resuming engraving after unexpected power outages. Ensure this feature is enabled in the app.

Image 7.1: The ATOMSTACK Swift Mini includes a 'Resume Engraving' feature, allowing work to continue seamlessly after unexpected power outages, minimizing material waste. This feature should be enabled in the app.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

The ATOMSTACK Swift Mini Laser Engraver comes with a 1 വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി. ATOMSTACK also provides lifetime customer support.

For any questions regarding setup, software guidance (LightBurn/Atomstack app), connectivity issues, replacement parts, or troubleshooting, please contact ATOMSTACK's dedicated support team directly through Amazon or their official channels.