PIX-LINK manufactures affordable wireless networking solutions, including WiFi repeaters, routers, range extenders, and USB network adapters.
PIX-LINK is a networking equipment brand owned by ചോങ്കിംഗ് ലാവിഡ് ഇൻഡസ്ട്രിയൽ കോ., ലിമിറ്റഡ്., established in 2006. Specializing in WiFi and Bluetooth technologies, the company produces a wide array of connectivity solutions designed to realize intelligent life for consumers worldwide. Their product lineup includes Wireless-N repeaters, AC dual-band routers, WiFi signal boosters, and USB adapters, all aimed at providing easy-to-install and cost-effective extensions to home and office networks.
Innovation acts as the core of PIX-LINK's development, ensuring their devices meet global standards such as FCC and CE compliance. With a focus on eliminating dead zones and enhancing signal stability, PIX-LINK products are widely used to support smart home devices, gaming consoles, and streaming media. The brand offers user-friendly setup interfaces via web browsers (commonly accessed via myrepeater.net) and supports WPS one-key configuration for seamless integration.
ഏറ്റവും പുതിയ മാനുവലുകൾ manuals+ ഈ ബ്രാൻഡിനായി ക്യൂറേറ്റ് ചെയ്തിരിക്കുന്നു.
ഈ ബ്രാൻഡിന്റെ സജ്ജീകരണം, ഇൻസ്റ്റാളേഷൻ, ട്രബിൾഷൂട്ടിംഗ് വീഡിയോകൾ കാണുക.
ഈ ബ്രാൻഡിനായുള്ള മാനുവലുകൾ, രജിസ്ട്രേഷൻ, പിന്തുണ എന്നിവയെക്കുറിച്ചുള്ള പതിവ് ചോദ്യങ്ങൾ.
എ തുറക്കുക web browser and enter http://myrepeater.net, http://192.168.1.254, or http://192.168.7.1 depending on your specific model. The default login is usually 'admin' for both username and password.
With the device powered on, press and hold the Reset button (often inside a pinhole) for approximately 8 seconds until the LED indicators flash or the device reboots.
New PIX-LINK extenders often broadcast an open network or use the default password '12345678'. Always check the label on the device for model-specific details.
This typically indicates the repeater failed to connect to the host router. Verify that you entered the correct WiFi password for your main router during configuration and ensure the repeater is placed within good signal range.