DIGITUS DN-651130 4 Port Fast Ethernet Network Switch
സ്പെസിഫിക്കേഷനുകൾ
- പവർ ഇൻപുട്ട്: 12 to 48V DC redundant power
- വൈദ്യുതി ഉപഭോഗം: < 3 വാട്ട്സ്
- നെറ്റ്‌വർക്ക് പ്രോട്ടോക്കോളുകൾ: IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u;100Base-TX/FX;
- വ്യവസായ നിലവാരം:
FCC CFR47 Part 15,EN55022/CISPR22, Class A, IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air), IEC61000-4-3 (RS): 10V/m (80~1000MHz), IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV, IEC61000-4-5 (Surge): Power rt: ±2kV/DM, ±4kV/CM; Data Port: ±2kV, IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz), IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) - അളവുകൾ (W x D x H): 118 x 92.4 x 40 മിമി
- Weight: Product Weight: 0.48KG
- Working Environment: working temperature: -40～80℃ ;Storage temperature: -40～80℃
- Relative Humidity: 5%~95 % ( no condensation)
- Relative Humidity: 5%~95 % ( no condensation)
- Relative humidity: 5% to max. 95% (non-condensing)
- തുറമുഖങ്ങളുടെ എണ്ണം: 4
- Ethernet speed: Fast Ethernet
- Industrial usage: yes
- Installation type: DIN rail
- Managed: no
- Number of ports (Uplink): 1
- Outdoorsuitable: no
- PoE (Power over Ethernet): no
- Protection against vanadlism: no
- Uplink port connection: SFP
- VLAN: ഇല്ല
പാക്കേജ് ഉള്ളടക്കങ്ങൾ
- 4+1 Port-Ethernet-Switch
- മാനുവൽ
| ലോജിസ്റ്റിക്സ് | ||||||
| നമ്പർ (പൈസകൾ) | ഭാരം (കിലോ) | ആഴം (സെ.മീ.) | വീതി (സെ.മീ.) | ഉയരം (സെ.മീ.) | cm³ | |
| പാക്കേജിംഗ് യൂണിറ്റ് കാർട്ടൺ | 24 | 13.00 | 22.50 | 39.00 | 46.50 | 40,803.80 |
| പാക്കേജിംഗ് യൂണിറ്റ് അകത്ത് | 1 | 0.54 | 0.00 | 0.00 | 0.00 | 0.00 |
| പാക്കേജിംഗ് യൂണിറ്റ് സിംഗിൾ | 1 | 0.54 | 5.40 | 13.50 | 16.50 | 1,202.85 |
| പാക്കേജിംഗ് ഇല്ലാത്ത നെറ്റ് സിംഗിൾ | 1 | 0.46 | 3.40 | 8.60 | 12.80 | 0.00 |
ഉൽപ്പന്ന ഉപയോഗ നിർദ്ദേശങ്ങൾ
Industrial 4+1 Port Fast Ethernet Switch Unmanaged, 4 RJ45 Ports 10/100 Mbits
DN-651130 is a Industrial Fast-Ethernet-Switch with 4-Port 10/100Mbps RJ45 +1 Port 100Mbps base-FX. The industrial graded switch has the operating temperature of -40℃ ~ 80℃, has the super firmness can adapt to all kinds of harsh environment, can also be conveniently placed in the compact space of the control box. The installation characteristics of the guide rail, wide temperature operation, IP40 protection class housing and LED indicator light make the DN-651130 a plug and play industrial grade device, providing a reliable and convenient solution for users to network their Ethernet devices.
DN-651130 is a industrial graded 4+1 -Port Ethernet Switch, provides non-blocking wire-speed performance in harsh industrial environment.
- 4-port 10/100Base-Tx RJ45 with autonegotiation and auto-MDI/ MDI- X function
- 1-port 100Base-Fx interface SFP
- 12V to 48V DC, redundant power input
- -40℃ to 80℃ operating temperature
- IP40 അലുമിനിയം ഭവനം
- 6KV DC ഇഥർനെറ്റ് ESD സംരക്ഷണം പിന്തുണയ്ക്കുന്നു
- Supports 6KV DC EFT protection for power line
- Free Fall, Shock and Vibration Stability
- DIN-റെയിൽ ഇൻസ്റ്റാളേഷൻ
- Performance Specification: Bandwidth: 1.6Gbps, Packet Buffer Memory:1Mbit, Packet Forwarding Rate:1.2Mpps, MAC Address Table: 2K
- Flow Control: Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
- LED Indicator: Power: Red, Fiber: Link 2(Green), Ethernet: Yellow.
ഇൻസ്റ്റലേഷൻ
- Place the switch on a stable surface near power and network connections.
- പവർ അഡാപ്റ്റർ സ്വിച്ചിലേക്ക് ബന്ധിപ്പിച്ച് ഒരു പവർ ഔട്ട്ലെറ്റിൽ പ്ലഗ് ചെയ്യുക.
- ഇതർനെറ്റ് കേബിളുകൾ ഉപയോഗിച്ച് ഉപകരണങ്ങൾ RJ45 പോർട്ടുകളിലേക്ക് ബന്ധിപ്പിക്കുക.
- If using the SFP FE uplink, connect the corresponding SFP
module and fiber optic cable.
ഓപ്പറേഷൻ
The switch is plug-and-play and requires no configuration. Devices connected to the ports should automatically establish network connections.
സുരക്ഷാ കുറിപ്പുകൾ
- ഈ ഉൽപ്പന്നം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്.
- Read all instructions and follow all warnings and instructions on the device.
- Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
- വെള്ളത്തിനടുത്ത് ഈ ഉപകരണം ഉപയോഗിക്കരുത്.
- Do not place this appliance near or above a radiator.
- The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
- Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
- The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
- Do not spray any liquids onto the appliance.
- Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
- പരസ്യം ഉപയോഗിച്ച് ഉപകരണം വൃത്തിയാക്കുകamp തുണി.
- Connect the device according to the power supply on the rating plate.
- To prevent damage to the appliance, it is important that all appliances are properly earthed.
- Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
- Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
- Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
- Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
- Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
- If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
- The mains cable, power supply unit or plug for the power supply is damaged or worn;
- Liquid has penetrated the appliance;
- The device has been exposed to rain or water;
- The device has been dropped or the housing has been damaged;
- The function of the device has obviously changed;
- The appliance cannot be operated as described in the operating instructions
മെയിൻ്റനൻസ്
Regularly check for dust accumulation and ensure proper ventilation around the switch for optimal performance.
www.digitus.info (www.digitus.info) എന്ന വെബ്‌സൈറ്റിൽ ലഭ്യമാണ്.
പതിവുചോദ്യങ്ങൾ
Can I cascade multiple switches together?
Yes, you can cascade multiple switches to expand your network capacity. Ensure proper cabling and consider network latency.
ഫാക്‌ടറി ക്രമീകരണങ്ങളിലേക്കുള്ള സ്വിച്ച് എങ്ങനെ പുനഃസജ്ജമാക്കാം?
Typically, there is a reset button on the switch. Press and hold it for a few seconds to restore factory settings.
പ്രമാണങ്ങൾ / വിഭവങ്ങൾ
 |
DIGITUS DN-651130 4 Port Fast Ethernet Network Switch [pdf] നിർദ്ദേശ മാനുവൽ DN-651130, DN-651130 4 Port Fast Ethernet Network Switch, 4 Port Fast Ethernet Network Switch, Fast Ethernet Network Switch, Ethernet Network Switch, Network Switch |