DrayTek Local Network Management Setup

ഉൽപ്പന്ന വിവരം

സ്പെസിഫിക്കേഷനുകൾ:

• Remote management capability
• Supports Telnet and HTTP server access
• Allows configuration without additional software
• Ability to change server port numbers
• Access control features for security

ഉൽപ്പന്ന ഉപയോഗ നിർദ്ദേശങ്ങൾ

Management Setup:
By default, the router can be managed using a Telnet client or a web browser on any operating system.

കോൺഫിഗറേഷൻ:

1. Click on “Management Setup” to access the setup page.
2. On the setup page, configure the following options:
   • Management Access Control:
     • Enable remote firmware upgrade (FTP): Check to allow firmware upgrades from the Internet.
     • Allow management from the Internet: Check to allow system administrators to log in from the Internet.
     • Disable PING from the Internet: Check to reject all PING packets from the Internet.
   • Access List: Specify allowed IPs/subnet masks for system administrator login.

ആമുഖം

By default, the router may be configured and managed with any Telnet client or Web browser running on any operating system. There is no requirement for additional software or utilities. However, for some specific environments, you may want to change the server port numbers for the built-in Telnet or HTTP server, create access lists to protect the router, or reject system administrator login from the Internet.

കോൺഫിഗറേഷൻ

Click Management Setup. The following setup page will be displayed.

മാനേജ്മെന്റ് ആക്സസ് നിയന്ത്രണം

• Enable remote firmware upgrade (FTP): Check to allow firmware upgrade from the Internet.
• Allow management from the Internet: Check to allow system administrators to log in from the Internet. The default is not allowed.
• Disable PING from the Internet: Check to reject all PING packets from the Internet. The default is allowed.

ആക്സസ് ലിസ്റ്റ്
You may specify that the system administrator can only log in from a specific host or network defined in the list. A maximum of three IP addresses/subnet masks may be entered.

• IP: Specifies an IP address allowed to log in to the router.
• സബ്നെറ്റ് മാസ്ക്: Specifies a subnet mask allowed to log in to the router.

പോർട്ട് സജ്ജീകരണം

• ഡിഫോൾട്ട് പോർട്ടുകൾ: Check to use standard port numbers for the Telnet and HTTP servers.
• User-Defined Ports: Check to specify user-defined port numbers for the Telnet and HTTP servers.

എസ്എൻഎംപി സജ്ജീകരണം

• Enable SNMP Agent: Check to enable the built-in SNMP agent.
• Get Community: Specify a string to identify the management communities for the SNMP GET command.
• Set Community: Specify a string to identify the management communities for the SNMP SET command.
• Manager Host IP: Specify the IP address of the SNMP manager station.
• ട്രാപ്പ് കമ്മ്യൂണിറ്റി: Specify a string to identify the management communities for the SNMP TRAP notifications.
• Notification Host IP: Specify the IP address that the station wants to receive the TRAP notifications.
• Trap Timeout: Specify a time out for traps message queue.

പതിവായി ചോദിക്കുന്ന ചോദ്യങ്ങൾ

എനിക്ക് റൂട്ടർ വിദൂരമായി നിയന്ത്രിക്കാനാകുമോ?

Yes, you can manage the router remotely using a Telnet client or web ബ്രൗസർ.

How many IPs/subnet masks can I enter in the access list?

You can enter a maximum of three IPs-subnet masks in the access list for system administrator login.

പ്രമാണങ്ങൾ / വിഭവങ്ങൾ

DrayTek Local Network Management Setup [pdf] നിർദ്ദേശങ്ങൾ Local Network Management Setup, Network Management Setup, Management Setup

റഫറൻസുകൾ

• ഉപയോക്തൃ മാനുവൽ