igloo SK4 Smart Lock Owner’s Manual

igloo SK4 Smart Lock

എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

• A: Lockbox
• B: Mounting Screws
• C: Screw Anchors
• D: Screw O-Rings
• E: AAA Batteries
• F: Battery Cover
• G: Storage Guard
• H: Plugs

നിങ്ങൾക്ക് എന്താണ് വേണ്ടത്

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

ഹലോ! ഇവിടെ തുടങ്ങൂ

സ്ക്രൂകൾ ഉപയോഗിച്ച് മൗണ്ടിംഗ്
Open the lockbox lid and take out all of the items inside. Find a place to install your Lockbox. Installing it closer to your locks and entryway will enable easier operation.

• ഘട്ടം 1: മൗണ്ടിംഗ് ദ്വാരങ്ങൾ അടയാളപ്പെടുത്തുക
  Tear off & tape the drill sheet where you would like to install the lockbox and mark the locations of the 4 x pilot holes.
• ഘട്ടം 2: പൈലറ്റ് ദ്വാരങ്ങൾ തുരത്തുക
  Drill the pilot hole size for the mounting surface as specified. Note if Anchor Bolts are required.
• Step 3: Insert Anchors (if required)
  Insert the 4 x screw anchors (C) for Brick, Concrete, Masonry or Drywall if required. The anchors should tightly fit into the pilot holes to ensure a secure hold.
• Step 4: Access Mounting Holes
  Remove the 4 plugs (H) & storage guard (G) to access the mounting holes.
• ഘട്ടം 5: സ്ക്രൂകൾ ഉപയോഗിച്ച് സുരക്ഷിതമാക്കുക
  Align the lockbox to the prepared holes and insert the screws (B) with a screwdriver in a clockwise twisting motion. Use the rubber O-rings (D) as shown if exposed to wet conditions.
• Step 6: Replace Storage Guard
  Replace the storage guard (G) and snap it into place.
• ഘട്ടം 7: ബാറ്ററികൾ ചേർക്കുക
  Open the battery cover (F) and insert the 4 x AAA (E) batteries as indicated. Close the battery cover. For temps below -20C (-4F) use LiMn02 AAA batteries for optimal battery life.
• ഘട്ടം 8: ലിഡ് അടയ്ക്കുക
  Close the lid firmly and the lockbox should automatically lock after 3 seconds with a green Status LED.
• Step 9: Test Unlocking
  Unlock the lockbox with the default pin by entering the code 1234567890 +
  Congratulations! You have installed your lock. Download the igloohome application from the App Store or Google Play Store to complete setup & configure your smart lock.

ഫീച്ചറുകൾ

• വലിയ സംഭരണ ​​സ്ഥലം: Ample interior storage to protect more than just keys such as cards, ID badges, fobs, remotes, asset tags, small tools & more.
• Rugged Outdoor Security: Built to protect with IP66 waterproofing, IK-07 level impact protection, a secure locking mechanism & tampഎർ അലാറങ്ങൾ.
• View Device Activity Logs: View all access activity by credential used, and view the battery life in the IGH mobile app.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Supports both battery and DC power for flexibility in low- or high-traffic areas. The compact design makes it easy to retrofit or install in new builds without complicated wiring.
• Backlit Physical Keypad: Large, easy to press, tactile buttons built for reliable PIN code entry and readability in direct sunlight or pitch black conditions.
• Access from Anywhere: algoPIN technology helps you generate a PIN code from anywhere and share it with anyone for instant access.
• Apple Watch Convenience: Use your Apple Watch to unlock via voice, a finger tap or gestures. Works with watchOS 7 and up.
• യാന്ത്രിക അൺലോക്ക്: Your lockbox automatically unlocks when you return home. Never fumble with keys again.
• Relock Reminder: Intuitive audio and visual alerts will prompt you to recharge the batteries when it runs low.
• യാന്ത്രിക ലോക്ക്: Automatically locks once the lockbox is shut to give you greater peace of mind.
• സുരക്ഷാ ലോക്കൗട്ട്: Disable the keypad after several incorrect access attempts to ensure your property is always secure.
• Decoy PIN Code: നിങ്ങളുടെ യഥാർത്ഥ പിൻ കോഡിന് മുമ്പായി ക്രമരഹിതമായ അക്കങ്ങൾ നൽകി സുരക്ഷ വർദ്ധിപ്പിക്കുകയും കാഴ്ചക്കാരെ ഒഴിവാക്കുകയും ചെയ്യുക.
• Tampഅലാറം: The lock will sound an alarm if the lid is opened without unlocking to alert and deter potential tampതെറ്റായ ശ്രമങ്ങൾ.
• Obstruction Alarm: The lock will sound an alarm if the bolt tongue cannot be extended or retracted fully to alert the user of any obstructions.
• കുറഞ്ഞ ബാറ്ററി അലേർട്ട്: Intuitive audio and visual alerts will prompt you to recharge the batteries when it runs low.
• അടിയന്തര ജമ്പ്സ്റ്റാർട്ട്: Easily jumpstart the reader with a Type-C cable connected to a power bank or compatible phone if battery is drained.
• വോളിയം നിയന്ത്രണം: നിങ്ങളുടെ മുൻഗണന അനുസരിച്ച് ലോക്ക് വോളിയം ക്രമീകരിക്കുക. ലെവലുകൾ 0 (നിശബ്ദമാക്കുക) മുതൽ 5 വരെ (ഉച്ചത്തിൽ) തിരഞ്ഞെടുക്കുക.

Audio and LED Indicators

ട്രബിൾഷൂട്ടിംഗ്

• I have placed the batteries inside but the device won’t turn on.
  Check that the batteries have been inserted in the correct orientation. There should be two long, and two short beeps when the batteries are installed correctly. If it still doesn’t work, try a new set of AAA 1.5V batteries.
• I am unable to see the device when trying to pair
  Ensure that the device is receiving power by pressing any button to wake it up. Waking it up will allow it to be seen in the app when pairing.
• The batteries have fully drained. How can I replace them?
  Connect a 5V DC power source via Type-C USB cable. The device will wake up, you can now enter a permanent pin code such as the master pin or use the app to unlock. Once unlocked, ensure that a fresh set of batteries have been inserted before closing.