THITRONIK BT-connect App
ഉൽപ്പന്ന വിവരം
സ്പെസിഫിക്കേഷനുകൾ:
- കല.-ന.: 106000
- ഇൻപുട്ട് വോളിയംtagഇ: 12/24 വി
- Components: BT-connect, Cable harness, RJ10 cable, Mounting material
ഉദ്ദേശിച്ച ഉപയോഗം
BT-connect is intended exclusively for controlling WiPro III (safe.lock). For Bluetooth control with BT-connect, only WiPro III (safe.lock) and Pro-finder may be connected to the RJ sockets of the device; connection and control of other devices is not permitted. For Bluetooth control via the THITRONIK® app, you need a compatible end device with an Android operating system or iOS (for information on the required versions, see www.thitronik.de/en/support/faq-products).
Connec\tion and installation
BT-connect has two inputs for WiPro III (safe.lock) and Pro-finder and should be mounted close to WiPro III (safe.lock), but still accessible for pairing.
Connect BT-connect to the WiPro III (safe.lock) and the Pro-finder by plugging the supplied cable into the two sockets. Both sockets are suited for WiPro III and Pro-finder. The power supply is connected in parallel to WiPro III and/or Pro-finder.
Make sure to interrupt the power supply of BT-connect before starting to work on the ground connection of WiPro III (safe.lock) and/or Pro-finder.
THITRONIK® App – Initialising and pairing:
Open the THITRONIK® App, tap on the three dots and open the Vehicle settings. Select Networking module / BT-connect (tick the box), choose Pairing and follow the instructions on the screen. When pairing has been completed, save your settings. 
Deleting saved smartphones and smartwatches:
- Press and hold the button on BT-connect and establish the module‘s power supply (insert the plug).
- Keep the button pressed until the LED lights up blue continuously. Now all connected devices have been deleted and the pairing mode has simultaneously been started.
- Finally, delete BT-connect from the Bluetooth settings on your smartphone/smartwatch.
വിതരണത്തിൻ്റെ വ്യാപ്തി
- ബിടി-കണക്റ്റ്
- കണക്ഷൻ കേബിളുകൾ
- cables RJ10
- മൗണ്ടിംഗ് മെറ്റീരിയൽ
പ്രധാനപ്പെട്ട വിവരങ്ങൾ
Please note that you cannot unlock your vehicle if no Bluetooth connection can be established (e.g. if the battery is flat). Thitronik GmbH assumes no liability for this. The user is responsible for using the device as intended and must ensure that no material damage, injuries or accidents can occur as a result of non-compliance with the described instructions.
സാങ്കേതിക ഡാറ്റ
- Power supply: 12 / 24VDC
- വൈദ്യുതി ഉപഭോഗം: <1.5mA
- Temperature range: -20 to +70°C
- Radio range (free field): max. 50m
- അളവുകൾ (WxHxD): 53x57x26mm
- ഭാരം: ഏകദേശം. 41 ഗ്രാം
- റേഡിയോ കണക്ഷൻ:
- BLUETOOTH® 5.0 low energy
- Number of connectable devices: 9 Interfaces: 2 x RJ10 (input for WiPro III (safe.lock) and Pro-finder)
2014/53/EU നിർദ്ദേശത്തിന്റെ ആവശ്യകതകളും നിയന്ത്രണങ്ങളും ഈ ഉൽപ്പന്നം പാലിക്കുന്നുവെന്ന് Thitronik GmbH ഇതിനാൽ പ്രഖ്യാപിക്കുന്നു. അനുരൂപതയുടെ പൂർണ്ണമായ പ്രഖ്യാപനം ഡൗൺലോഡ് ചെയ്യാൻ ലഭ്യമാണ്: www.thitronik.de/support (സപ്പോർട്ട്)
പതിവുചോദ്യങ്ങൾ
What should I do if I cannot unlock my vehicle due to no Bluetooth connection?
If no Bluetooth connection can be established (e.g., due to a flat battery), please note that you may not be able to unlock your vehicle. Thitronik GmbH assumes no liability for this situation.
പ്രമാണങ്ങൾ / വിഭവങ്ങൾ
 |
THITRONIK BT-connect App [pdf] ഉപയോക്തൃ ഗൈഡ് 106000, BT-connect App, BT-connect, App |