ZZ 2 IT2-MAS-QTG കാർപ്ലേ ആൻഡ്രോയിഡ് ഓട്ടോ ഇന്റർഫേസുകൾ

കഴിഞ്ഞുview

Thank you for purchasing a genuine ZZ-2 CarPlay/Android Auto interface – the highest quality smartphone integration system on the market! We guarantee your satisfaction with this OE integration provided it is installed & used properly. Each kit has been specifically designed to work in the most logical way possibleusing OE controls. Due to the large variety of vehicle entertainment systems, some limitations will apply.

കിറ്റ് ഘടകങ്ങൾ

സ്വിച്ച് ക്രമീകരണങ്ങൾ മുക്കുക

Dip Switch Settings – Reset power after changes (or press button fully once)

കുറിപ്പുകൾ:

• You must be in AUX Audio source mode (OE Land Rover system in order to hear audio playback from CarPlay/AA.
• The entire installation happens at the RADIO, not the screen.
• The provided ‘Dummy AUX plug’ must be connected to the OE AUX input port to allow for AUX in sound.

IT2 iPhone Pairing

For this system, it’s best to try connecting to the Phone via the interface first, and if its having trouble connecting, find the interface through the phone (via Bluetooth) during this operation.

1. Begin by turing Bluetooth and WIFI ON on the iPhone first (Settings > Bluetooth – set ON, then Settings > WIFI – set ON )
2. Next, with the interface menu screen on the radio screen (see furher down document for information on switching to the interface), choose Setup.
3. Once in settings, swipe down to Bluetooth.
4. Once in ‘Bluetooth’, choose Discover.
5. Shortly after entering the ‘Discover’ menu, ‘iPhone’ should appear. Select it, and it will ask to pair. Pair with the phone to begin the CarPlay registration process.
6. Follow the prompts on the phone to allow and use CarPlay. For a detailed step by step on this process, see the next page. Once the initial pairing is complete, CarPlay should load shortly. If not, go back to the main menu, and select ‘CarPlay’.

1.  When using a USB cable to connect your iPhone, only use a certified Apple cable.
2. To use wireless connectivity, follow these steps:
   • a. Go to Settings > Bluetooth and the phone should be able to find a Bluetooth device called ‘IDCORE’ or ‘ZZ2’ under ‘Other Devices’.
3. A Bluetooth Pairing Request will be displayed on the screen with a specific code which should match what is shown on CarPlay. Select ‘Pair’. Note: following the BT connection, there is no need to try and connect WIFI manually (although it does need to be ON), after the BT connection process is complete, the WIFI will connect automatically on its own.
4. Immediately following the Pairing notification, a new request to Sync your contact with the car will be displayed. Select ‘Allow’ in order to have caller ID and access to your contacts through CarPlay.
5. A notification asking for a permission to connect your iPhone to the car even when the phone is locked will pop up. Select ‘Use CarPlay’ and the CarPlay main screen should show up on the factory radio screen. If not, press and hold the radio switching button (Arrow button).

NOTE: If you’re having pairing issues:

• Perform a ‘hard reset’ on the phone (will not delete data) in order to prevent any malfunction: With the phone unlocked, press & release VOL+, then press & release VOL-, then press and HOLD power for 10 seconds (wait for reboot – do not touch the screen).
• DELETE ALL other ‘CarPlay’ devices out of the phone (delete all in ‘Settings – General – CarPlay )+
• Verify ‘Low Data Mode’ is not enabled in phone settings.
• Verify that the antenna is not mounted behind any metal dash panels.

IT2 Android Pairing

For this system, it’s best to try connecting to the Phone via the interface first, and if its having trouble connecting, find the interface through the phone (via Bluetooth) during this operation.

1. Begin by turing Bluetooth ON on the iPhone first (Settings > Bluetooth – set ON, then Settings > WIFI – set ON)
2. Next, with the interface menu screen on the radio screen (see furher down document for information on switching to the interface), choose Setup.
3. Once in settings, swipe down to Bluetooth.
4. Once in ‘Bluetooth’, choose Discover.
5. Shortly after entering the ‘Discover’ menu, the Android phone name should appear. Select it, and it will ask to pair. Pair with the phone to begin the Android registration process.
6. Follow the prompts on the phone to allow and use Android Auto. For a \detailed step by step on this process, see the next page. Once the initial pairing is complete, Android Auto should load shortly. If not, go back to the main menu, and select ‘Android’.

1. When using a USB cable to connect your Android, only use a certified Android OE cable.
2. To use wireless connectivity (Android 11+ only), follow these steps:
   • a. Go to Settings > Bluetooth Device Connection, or LONG PRESS on the Bluetooth toggle to enter Bluetooth connections
   • b. Select ‘Pair new device’
   • c. Choose ‘IDCORE’ or ‘ZZ2’
   • d. Bluetooth Pairing Request will be displayed on the screen with a specific code. Select Pair. Note: following the BT connection, there is no need to try and connect WIFI manually (although it does need to be ON), after the BT connection process is complete, the WIFI will connect automatically on its own.
   • e. Immediately following the Pairing notification, a system prompt may or may not appear for contacts sharing with the system. Allow all requests for the best user experience.
   • f. Shortly after allowing/denying pairing requests, Android Auto will appear on the main screen automatically (for most phones). If not, press & hold the switching button for 2 seconds to switch in and out of Android Auto (to OE radio mode): Arrow button
   • Not every Android phone will work wirelessly. Pixel, Samsung & OnePlus devices equipped with Android 11 (or higher) have been tested to function well wirelessly. If your phone is having issues with wireless connectivity, verify with the installer that the antenna is not mounted behind any metal. If issues continue, use the original USB-C cable instead and connect to the interface’s USB Input (do NOT use an aftermarket USB cablel – also, the vehicle’s USB port is NOT used).
   • Verify that ‘Android Auto’ is installed on your phone.
   • Verify that in Android Auto settings (phone) that ‘Wireless’ is turned ON.
   • Verify that WIFI is ON. The WIFI will connect automatically after Bluetooth has been properly paired.

ഐടി2 ഇന്റർഫേസ് മെനു കഴിഞ്ഞുview

To gain access to the Interface menu, start in CarPlay/AA mode, and locate the exit tile, labeled as ‘Maserati’ or ‘Exit’. Selecting this tile will bring you in the interface setup menu, NOT the Maserati OE system.

IT2-MAS-QTG CarPlay/AA Activation

CALL AUDIO ROUTING: If using the OEM system to handle phone calls, answer incoming calls with the steering wheel. Also if using iPhone, set ‘Call Audio Routing’ to ‘Bluetooth Headset” (default is ‘Automatic’).

ബന്ധപ്പെടുക

• support@zz-2.com
• 929-220-1212
• ടോൾ ഫ്രീ: 877-241-2526
• വിപുലീകരണം 2: സാങ്കേതിക പിന്തുണ

ഉടമ്പടി: എല്ലാ സംസ്ഥാന, ഫെഡറൽ നിയമങ്ങൾക്കും അനുസൃതമായി ഈ ഉൽപ്പന്നം ഉപയോഗിക്കാൻ അന്തിമ ഉപയോക്താവ് സമ്മതിക്കുന്നു. ZZDOIS LLC dba ZZ-2 അതിന്റെ ഉൽപ്പന്നത്തിന്റെ ദുരുപയോഗത്തിന് ബാധ്യസ്ഥനല്ല. നിങ്ങൾ അംഗീകരിക്കുന്നില്ലെങ്കിൽ, ഉടൻ ഉപയോഗം നിർത്തി ഉൽപ്പന്നം റീട്ടെയിലർക്ക് തിരികെ നൽകുക. ഈ ഉൽപ്പന്നം ഓഫ്-റോഡ് ഉപയോഗത്തിനും യാത്രക്കാരുടെ വിനോദത്തിനും മാത്രമുള്ളതാണ്.

പ്രമാണങ്ങൾ / വിഭവങ്ങൾ

ZZ 2 IT2-MAS-QTG കാർപ്ലേ ആൻഡ്രോയിഡ് ഓട്ടോ ഇന്റർഫേസുകൾ [pdf] ഉപയോക്തൃ ഗൈഡ് IT2-MAS-QTG, IT2-MAS-QTG കാർപ്ലേ ആൻഡ്രോയിഡ് ഓട്ടോ ഇന്റർഫേസുകൾ, IT2-MAS-QTG, കാർപ്ലേ ആൻഡ്രോയിഡ് ഓട്ടോ ഇന്റർഫേസുകൾ, ഓട്ടോ ഇന്റർഫേസുകൾ, ഇന്റർഫേസുകൾ

റഫറൻസുകൾ

• ഉപയോക്തൃ മാനുവൽ