എക്സ്ടെക് DL150 ട്രൂ RMS AC വോളിയംtagഇ/നിലവിലെ ഡാറ്റാലോഗർ ഉപയോക്തൃ മാനുവൽ

ആമുഖം

The Extech DL150 is a True RMS AC voltage and current data logger designed for precise measurement and recording of electrical parameters. It is capable of logging up to 100,000 readings of TRMS AC Voltage (up to 600V) or Current (up to 200 Amp). This device features a user-programmable sample rate ranging from 1 second to 24 hours, providing flexibility for various monitoring needs. The integrated LCD displays real-time data including time/date, current readings, and minimum/maximum values. It also indicates if user-settable high/low alarms have been exceeded. Data can be easily downloaded to a PC via the USB interface for analysis using the included software or for export to a spreadsheet. The DL150 supports Normal, Peak, and Capture (user-specified trigger level) recording modes, making it a versatile tool for electrical diagnostics and monitoring.

ബോക്സിൽ എന്താണുള്ളത്

Image: The Extech DL150 Datalogger shown with all its included accessories, neatly laid out. This includes the main unit, current clamp, test leads, alligator clips, software CD, USB cable, 110-Volt AC Adapter, and a 3.6V Lithium Battery.

പാക്കേജ് തുറക്കുമ്പോൾ, ഇനിപ്പറയുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ദയവായി ഉറപ്പാക്കുക:

• എക്സ്ടെക് DL150 ട്രൂ RMS AC വോളിയംtage/Current Datalogger Unit
• നിലവിലെ Clamp
• ടെസ്റ്റ് ലീഡുകൾ
• അലിഗേറ്റർ ക്ലിപ്പുകൾ
• Software (on CD or available for download)
• USB കേബിൾ
• 110-വോൾട്ട് എസി അഡാപ്റ്റർ
• 3.6V ലിഥിയം ബാറ്ററി

If any items are missing or damaged, please contact Extech customer support immediately.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The DL150 requires 4 AAA batteries (included). To install, locate the battery compartment on the rear of the unit. Open the compartment cover, insert the batteries observing the correct polarity (+/-), and then securely close the cover. Ensure the battery is properly seated for continuous operation.

2. സോഫ്റ്റ്വെയർ ഇൻസ്റ്റാളേഷൻ

Before connecting the datalogger to your computer, install the provided software. Insert the software CD into your computer's drive and follow the on-screen instructions. If a CD drive is not available, the software can typically be downloaded from the official Extech website. This software is essential for configuring the datalogger, downloading recorded data, and analyzing measurements.

3. Connecting the Datalogger

Connect the DL150 to your computer using the supplied USB cable. The USB port is located on the side of the datalogger. Once connected, the computer should recognize the device, and you can launch the Extech software to begin configuration.

4. Attaching Test Leads and Current Clamp

വോളിയത്തിന്tage measurements, connect the test leads to the appropriate input jacks on the DL150. For current measurements, connect the current clamp to its designated input. Ensure all connections are secure before proceeding with any measurements.

ഓപ്പറേഷൻ

Image: The Extech DL150 Datalogger showing its LCD screen with a clear voltage reading and time/date information. The device's buttons for power, Min/Max, Start/Stop, and Peak are visible.

1. പവർ ഓൺ/ഓഫ്

അമർത്തുക ശക്തി button to turn the DL150 on or off. The LCD will illuminate, displaying the current time and date, along with measurement readings.

2. Configuring Datalogging Parameters

Use the Extech software on your PC to configure the datalogging parameters. This includes setting the sample rate (from 1 second to 24 hours), selecting the measurement type (AC Voltage or AC Current), and defining high/low alarm thresholds. You can also choose between Normal, Peak, and Capture recording modes.

3. Starting and Stopping Data Logging

Once configured, press the ആരംഭിക്കുക/നിർത്തുക button on the device to begin data logging. The LCD will indicate that logging is active. Press the same button again to stop logging. The device can store up to 100,000 readings.

4. Viewing Min/Max and Peak Readings

During or after logging, press the പരമാവധി/മിനിറ്റ് button to cycle through the minimum and maximum recorded values. Press the കൊടുമുടി എന്നതിലേക്കുള്ള ബട്ടൺ view the peak reading captured during the logging session.

5. Downloading Data

Connect the DL150 to your PC via the USB cable. Open the Extech software and follow the instructions to download the logged data. The software allows you to view the data graphically, export it to various formats (e.g., CSV for spreadsheets), and generate reports.

മെയിൻ്റനൻസ്

1. യൂണിറ്റ് വൃത്തിയാക്കൽ

Wipe the exterior of the DL150 with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before storage or further use.

2. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the battery indicator on the LCD shows low power, replace the 4 AAA batteries promptly to ensure accurate readings and continuous operation. Refer to the "Battery Installation" section under Setup for detailed steps.

3. സംഭരണം

When not in use for extended periods, store the DL150 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to remove the batteries if storing for more than one month to prevent leakage.

ട്രബിൾഷൂട്ടിംഗ്

This section provides solutions to common issues you might encounter with your Extech DL150.

• ഉപകരണം പവർ ഓൺ ചെയ്യുന്നില്ല:
  • Check if the batteries are correctly installed with proper polarity.
  • ബാറ്ററികൾ പുതിയവ ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക.
  • പവർ ബട്ടൺ ദൃഡമായി അമർത്തിയെന്ന് ഉറപ്പാക്കുക.
• No data logging:
  • Verify that the START/STOP button was pressed to initiate logging.
  • Check if the memory is full (the device can log up to 100,000 readings). Download data to clear memory.
  • എസ് ഉറപ്പാക്കുകample rate is correctly configured in the software.
• Cannot connect to PC / Software issues:
  • Ensure the USB cable is securely connected to both the DL150 and the PC.
  • Verify that the Extech software drivers are correctly installed. You may need to reinstall the software or download the latest drivers from the Extech webസൈറ്റ്.
  • നിങ്ങളുടെ കമ്പ്യൂട്ടറിൽ മറ്റൊരു USB പോർട്ട് പരീക്ഷിക്കുക.
• കൃത്യമല്ലാത്ത വായനകൾ:
  • Ensure test leads and current clamp are properly connected and making good contact with the circuit.
  • Verify that the correct measurement type (AC Voltage or AC Current) is selected.
  • ബാറ്ററി നില പരിശോധിക്കുക; കുറഞ്ഞ ബാറ്ററികൾ കൃത്യതയെ ബാധിച്ചേക്കാം.

For more detailed troubleshooting or issues not covered here, please refer to the full user manual PDF or contact Extech customer support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Extech products are designed for reliability and performance. For detailed warranty information, including terms, conditions, and duration, please refer to the official user manual PDF provided with your product or available for download from the Extech webസൈറ്റ്. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും വൈകല്യങ്ങൾ വാറന്റി സാധാരണയായി ഉൾക്കൊള്ളുന്നു.

For technical support, service, or to purchase accessories, please visit the official Extech webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. ബന്ധപ്പെടാനുള്ള വിവരങ്ങളും അധിക ഉറവിടങ്ങളും നിങ്ങൾക്ക് ഇവിടെ കണ്ടെത്താനാകും Extech Brand Store on Amazon or directly through the Extech corporate webസൈറ്റ്.

അധിക വിഭവങ്ങൾ:

• ഉപയോക്തൃ ഗൈഡ് (PDF)
• ഉപയോക്തൃ മാനുവൽ (PDF)